On Fri, Aug 05, 2022 at 04:59:35PM +0200, Pali Rohár wrote:
On Friday 05 August 2022 10:47:31 Tom Rini wrote:
On Fri, Aug 05, 2022 at 04:21:24PM +0200, Pali Rohár wrote:
On Wednesday 03 August 2022 12:13:18 Tom Rini wrote:
On Wed, Aug 03, 2022 at 06:00:13PM +0200, Pali Rohár wrote:
On Tuesday 02 August 2022 06:58:26 Tom Rini wrote:
On Tue, Aug 02, 2022 at 11:13:38AM +0200, Pali Rohár wrote:
> Hello Tom! > > Your commit de47ff536363289f92f85ed1e4901724d238432d ("Convert > CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") seems to be broken.
I thought I had managed to mirror the TPL/SPL/full usage that was there prior, but apparently some got missed.
Yea, conversion to Kconfig seems that was incorrect.
As the config files were just unclear, but you seem to understand what it's supposed to be, a patch to clean it up would be most appreciated, thanks.
-- Tom
Broken is also commit d433c74eecdce1e4952ef4e8c712a9289c0dfcc2. Seems that all kconfig migration changes done after that commit are broken.
I really do not have energy to investigate what and how was broken due to incorrect kconfig migration.
I did simple test. Applied following change:
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index a6523753d5ca..489f24df0ab1 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -624,3 +624,7 @@ __stringify(__PCIE_RST_CMD)"\0" "bootm $norbootaddr - $norfdtaddr"
#endif /* __CONFIG_H */
+#ifdef CONFIG_SDCARD +#error +#endif
And then called:
make CROSS_COMPILE=powerpc-linux-gnuspe- P2020RDB-PC_defconfig u-boot.bin
And it failed, even when this defconfig file is not SD card builds.
Where is PBL in that case even then?
P2020 (and older) are pre-PBL boards, they do not support NXP PBL header.
Ah, OK, then it should just be removing TARGET_P2020RDB from the choice on "Freescale PBL load location".