Dear Kim,
In message 4A394E90.6080600@RuggedCom.com Richard Retanubun wrote:
Greetings,
Our board have one PHY's SMI attached via GPIO (bitBang SMI) and the other network device (a switch) connected to the 8360e's real SMI controller.
This patch aims to make u-boot able to use both at the same time. I am checking if I am on the right track and if I have missed something.
The board-specific header file #define looks like this (similar to the FIXED_PHY) method
[snip] #define CONFIG_SYS_BITBANG_PHY_PORT(devnum) devnum, #define CONFIG_SYS_BITBANG_PHY_PORTS \ CONFIG_SYS_BITBANG_PHY_PORT(10) [/snip]
My code's baseline is at commit 57fe30194d3c15c37d9ff06dbd2a4c1ffccda018 (post v2009.06)
Thank you for everyone's time.
- Richard
From 644a9cd7b9d9331989a3cf59d920a072c9dafe05 Mon Sep 17 00:00:00 2001 From: Richard Retanubun RichardRetanubun@RuggedCom.com Date: Wed, 17 Jun 2009 16:00:41 -0400 Subject: [PATCH] 83xx: UEC: Added support for bitBang MII driver access to PHYs
This patch enabled support for having PHYs on bitBang MII and uec MII operating at the same time.
drivers/net/phy/miiphybb.c | 28 ++++++++++++++++++++++------ drivers/net/phy/miiphybb.h | 26 ++++++++++++++++++++++++++ drivers/qe/uec.c | 6 ++---- drivers/qe/uec_phy.c | 34 ++++++++++++++++++++++++++++++++++ 4 files changed, 84 insertions(+), 10 deletions(-) create mode 100644 drivers/net/phy/miiphybb.h
Can you please check the status of this patch: http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/61758
Thanks.
Best regards,
Wolfgang Denk