On Sun, Dec 19, 2021 at 11:18 PM Stefan Roese sr@denx.de wrote:
Hi Tony,
On 12/18/21 22:41, Tony Dinh wrote:
Hi Pali,
On Sat, Dec 18, 2021 at 5:17 AM Pali Rohár pali@kernel.org wrote:
On Friday 17 December 2021 20:23:28 Tony Dinh wrote:
Add board defconfig file for Pogoplug V4 board
Signed-off-by: Tony Dinh mibodhi@gmail.com
configs/pogo_v4_defconfig | 97 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 configs/pogo_v4_defconfig
diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig new file mode 100644 index 0000000000..b183c9c46f --- /dev/null +++ b/configs/pogo_v4_defconfig @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2017-2021 Tony Dinh mibodhi@gmail.com +# +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_SYS_DCACHE_OFF=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_THUMB_BUILD=y +CONFIG_ARCH_KIRKWOOD=y +CONFIG_SYS_TEXT_BASE=0x600000 +CONFIG_TARGET_POGO_V4=y +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0xC0000 +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug_v4" +CONFIG_BOOTDELAY=10 +CONFIG_BOOTSTAGE=y +CONFIG_SHOW_BOOT_PROGRESS=y +CONFIG_USE_PREBOOT=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="Pogo_V4> " +CONFIG_IDENT_STRING="\nPogoplug V4" +CONFIG_SYS_LOAD_ADDR=0x800000 +CONFIG_VERSION_VARIABLE=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_NAND=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)" +CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" +CONFIG_CMD_UBI=y +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_PARTITION_UUIDS=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_EHCI_HCD=y +CONFIG_OF_LIBFDT=y +CONFIG_CMD_FDT=y +CONFIG_CMD_BOOTZ=y +CONFIG_NETCONSOLE=y +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_CMD_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_DEVICE=y +CONFIG_NET=y +CONFIG_NETDEVICES=y +CONFIG_MVGBE=y +CONFIG_MII=y +CONFIG_DM=y +CONFIG_DM_USB=y +CONFIG_OF_CONTROL=y +CONFIG_DM_ETH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_BLK=y +CONFIG_CMD_SATA=y +CONFIG_SATA_MV=y +CONFIG_DM_MMC=y +CONFIG_MVEBU_MMC=y +CONFIG_CMD_PCI=y +CONFIG_PCI=y +CONFIG_PCI_MVEBU=y +CONFIG_PCI_PNP=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_BOARD_LATE_INIT=y +# +# RTC emulation +# +CONFIG_CMD_DATE=y +CONFIG_PROT_UDP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_DNS=y +CONFIG_DM_RTC=y +CONFIG_RTC_EMULATION=y +# +# Turn off unused capabilities to save space +# +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_MMC_HW_PARTITIONING is not set
2.20.1
Hello! Please regenerate this defconfig file to its canonical form. You can do it by commands:
make pogo_v4_defconfig make savedefconfig mv defconfig configs/pogo_v4_defconfig
Yes, it's a bit harder to read, but it should be done.
It's not a matter of "harder to read". It's the only way, this file should be generated. Otherwise this will very likely generate merge problems when other changes might get introduced to the config files (e.g. by using moveconfig.py).
I see. Thanks for the explanation!
Tony
Thanks, Stefan