This board has not been converted to generic board by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/mach-kirkwood/Kconfig | 4 - board/LaCie/wireless_space/Kconfig | 12 -- board/LaCie/wireless_space/MAINTAINERS | 6 - board/LaCie/wireless_space/Makefile | 12 -- board/LaCie/wireless_space/kwbimage.cfg | 71 ----------- board/LaCie/wireless_space/wireless_space.c | 165 ------------------------- configs/wireless_space_defconfig | 7 -- include/configs/wireless_space.h | 179 ---------------------------- 8 files changed, 456 deletions(-) delete mode 100644 board/LaCie/wireless_space/Kconfig delete mode 100644 board/LaCie/wireless_space/MAINTAINERS delete mode 100644 board/LaCie/wireless_space/Makefile delete mode 100644 board/LaCie/wireless_space/kwbimage.cfg delete mode 100644 board/LaCie/wireless_space/wireless_space.c delete mode 100644 configs/wireless_space_defconfig delete mode 100644 include/configs/wireless_space.h
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index c053602..aab5d19 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -34,9 +34,6 @@ config TARGET_NET2BIG_V2 config TARGET_NETSPACE_V2 bool "LaCie netspace_v2 Board"
-config TARGET_WIRELESS_SPACE - bool "LaCie Wireless_space Board" - config TARGET_IB62X0 bool "ib62x0 Board"
@@ -64,7 +61,6 @@ source "board/iomega/iconnect/Kconfig" source "board/keymile/km_arm/Kconfig" source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" -source "board/LaCie/wireless_space/Kconfig" source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" diff --git a/board/LaCie/wireless_space/Kconfig b/board/LaCie/wireless_space/Kconfig deleted file mode 100644 index 75a2fc5..0000000 --- a/board/LaCie/wireless_space/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_WIRELESS_SPACE - -config SYS_BOARD - default "wireless_space" - -config SYS_VENDOR - default "LaCie" - -config SYS_CONFIG_NAME - default "wireless_space" - -endif diff --git a/board/LaCie/wireless_space/MAINTAINERS b/board/LaCie/wireless_space/MAINTAINERS deleted file mode 100644 index c32ecb8..0000000 --- a/board/LaCie/wireless_space/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -WIRELESS_SPACE BOARD -M: Albert ARIBAUD albert.u.boot@aribaud.net -S: Maintained -F: board/LaCie/wireless_space/ -F: include/configs/wireless_space.h -F: configs/wireless_space_defconfig diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile deleted file mode 100644 index 90a84f4..0000000 --- a/board/LaCie/wireless_space/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2011 Simon Guinot sguinot@lacie.com -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar prafulla@marvell.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := wireless_space.o ../common/common.o diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg deleted file mode 100644 index 037248b..0000000 --- a/board/LaCie/wireless_space/kwbimage.cfg +++ /dev/null @@ -1,71 +0,0 @@ -# -# Copyright (C) 2012 Albert ARIBAUD albert.u.boot@aribaud.net -# -# Based on netspace_v2 kwbimage.cfg: -# Copyright (C) 2011 Simon Guinot sguinot@lacie.com -# -# Based on Kirkwood support: -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar prafulla@marvell.com -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand # Boot from NAND flash -NAND_PAGE_SIZE 800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Values taken from image original LaCie U-Boot header dump! - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1B1B1B9B - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register - -DATA 0xFFD01404 0x37743000 # DDR Controller Control Low - -DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) - -DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) - -DATA 0xFFD01410 0x0000CCCC # DDR Address Control - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control - -DATA 0xFFD01418 0x00000000 # DDR Operation - -DATA 0xFFD0141C 0x00000662 # DDR Mode - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode - -DATA 0xFFD01424 0x0000F07F # DDR Controller Control High - -DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values) - -DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0 -DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled -DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -DATA 0xFFD20134 0x66666666 -DATA 0xFFD20138 0x66666666 -DATA 0xFFD10000 0x01112222 -DATA 0xFFD1000C 0x00000000 -DATA 0xFFD10104 0x00000000 -DATA 0xFFD10100 0x40000000 -# End of Header extension -DATA 0x0 0x0 diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c deleted file mode 100644 index 8620e4b..0000000 --- a/board/LaCie/wireless_space/wireless_space.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2011 Simon Guinot sguinot@lacie.com - * - * Based on Kirkwood support: - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar prafulla@marvell.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/arch/gpio.h> - -#include "../common/common.h" -#include "netdev.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* GPIO configuration: start FAN at low speed, USB and HDD */ - -#define WIRELESS_SPACE_OE_LOW 0xFF006808 -#define WIRELESS_SPACE_OE_HIGH 0x0000F989 -#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080 -#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240 - -#define WIRELESS_SPACE_REAR_BUTTON 13 -#define WIRELESS_SPACE_FRONT_BUTTON 43 - -const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Fan speed (bit 1) */ - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_GPIO, /* Red led */ - MPP14_GPIO, /* USB fuse */ - MPP15_SATA0_ACTn, - MPP16_GPIO, /* SATA 0 power */ - MPP17_GPIO, /* SATA 1 power */ - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, /* Gigabit Ethernet 1 */ - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GE1_8, - MPP29_GE1_9, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GE1_14, - MPP35_GE1_15, - MPP36_GPIO, /* Fan speed (bit 2) */ - MPP37_GPIO, /* Fan speed (bit 0) */ - MPP38_GPIO, /* Fan power */ - MPP39_GPIO, /* Fan rotation fail */ - MPP40_GPIO, /* Ethernet switch link */ - MPP41_GPIO, /* USB enable host vbus */ - MPP42_GPIO, /* LED clock control */ - MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */ - MPP44_GPIO, /* Red LED on/off */ - MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */ - MPP46_GPIO, /* Green LED on/off */ - MPP47_GPIO, /* LED (blue, green) SATA activity blink */ - MPP48_GPIO, /* Blue LED on/off */ - 0 -}; - -struct mv88e61xx_config swcfg = { - .name = "egiga0", - .vlancfg = MV88E61XX_VLANCFG_ROUTER, - .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, - .led_init = MV88E61XX_LED_INIT_EN, - .mdip = MV88E61XX_MDIP_NOCHANGE, - .portstate = MV88E61XX_PORTSTT_FORWARDING, - .cpuport = 0x20, - .ports_enabled = 0x3F, -}; - -int board_early_init_f(void) -{ - /* Gpio configuration */ - mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH, - WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - kirkwood_mpp_conf(kwmpp_config, NULL); - - return 0; -} - -int board_init(void) -{ - /* Machine number */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - - /* Boot parameters address */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#if defined(CONFIG_MISC_INIT_R) -int misc_init_r(void) -{ -#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) - if (!getenv("ethaddr")) { - uchar mac[6]; - if (lacie_read_mac_address(mac) == 0) - eth_setenv_enetaddr("ethaddr", mac); - } -#endif - return 0; -} -#endif - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) -/* Configure and initialize PHY */ -void reset_phy(void) -{ - /* configure switch on egiga0 */ - mv88e61xx_switch_initialize(&swcfg); -} -#endif - -#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD) -/* Return GPIO button status */ -static int -do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (strcmp(argv[1], "button") == 0) { - if (strcmp(argv[2], "rear") == 0) - /* invert GPIO result for intuitive while/until use */ - return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON); - else if (strcmp(argv[2], "front") == 0) - return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON); - else - return -1; - } else { - return -1; - } -} - -U_BOOT_CMD(ws, 3, 0, do_ws, - "Return GPIO button status 0=off 1=on", - "- ws button rear|front: test buttons' states\n" -); -#endif diff --git a/configs/wireless_space_defconfig b/configs/wireless_space_defconfig deleted file mode 100644 index 63013f6..0000000 --- a/configs/wireless_space_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_WIRELESS_SPACE=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -ONFIG_SYS_PROMPT="ws> " diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h deleted file mode 100644 index 191ac1b..0000000 --- a/include/configs/wireless_space.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright (C) 2011 Albert ARIBAUD albert.u.boot@aribaud.net - * - * Based on the netspace_v2 code which is - * Copyright (C) 2011 Simon Guinot sguinot@lacie.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_WIRELESS_SPACE_H -#define _CONFIG_WIRELESS_SPACE_H - -/* - * Machine number definition - */ -#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ -#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE -#define CONFIG_IDENT_STRING " Wireless Space" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -/* SoC name */ -#define CONFIG_KW88F6281 -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_NAND -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_USB - -/* - * Core clock definition - */ -#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ - -/* - * SDRAM configuration - */ -#define CONFIG_NR_DRAM_BANKS 1 - -/* - * Different SDRAM configuration and size for some of the boards derived - * from the Network Space v2 - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* Remove or override few declarations from mv-common.h */ -#undef CONFIG_RBTREE -#undef CONFIG_SYS_IDE_MAXBUS -#undef CONFIG_SYS_IDE_MAXDEVICE -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */ -#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */ -#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */ -#define CONFIG_MII -#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_NETCONSOLE -#define CONFIG_MV88E61XX_SWITCH -#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE -#define CONFIG_MV88E61XX_CMD -#define CONFIG_CMD_TFTPPUT -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /* CONFIG_MVSATA_IDE */ - -/* - * Enable GPI0 support - */ -#define CONFIG_KIRKWOOD_GPIO - -/* - * Enable I2C support - */ -#ifdef CONFIG_CMD_I2C -/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ -#define CONFIG_CMD_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ -#endif /* CONFIG_CMD_I2C */ - -/* - * Partition support - */ -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION - -/* - * File systems support - */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -/* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Console configuration - */ -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* - * Enable device tree support - */ -#define CONFIG_OF_LIBFDT - -/* - * Environment variables configurations - */ - -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ -#define CONFIG_ENV_SIZE 0x20000 /* 128KB */ -#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ - -/* - * Board-specific command to make using buttons etc easier - */ - -#define CONFIG_WIRELESS_SPACE_CMD - -/* - * Default environment variables - */ -#define CONFIG_PREBOOT - -#define CONFIG_BOOTARGS "console=ttyS0,115200" - -#define CONFIG_BOOTCOMMAND \ - "if run usbload || run diskload; then bootm; fi" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "bootfile=uImage\0" \ - "loadaddr=0x800000\0" \ - "autoload=no\0" \ - "netconsole=" \ - "set stdin $stdin,nc; " \ - "set stdout $stdout,nc; " \ - "set stderr $stderr,nc;\0" \ - "diskload=ide reset && " \ - "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ - "usbload=usb start && " \ - "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \ - "preboot=" \ - "dhcp && run netconsole\0" - -#endif /* _CONFIG_WIRELESS_SPACE_H */