Stephen,
On Wed, Feb 13, 2013 at 1:02 PM, Stephen Warren swarren@wwwdotorg.org wrote:
On 02/13/2013 12:59 PM, Tom Warren wrote:
Stephen,
On Tue, Feb 12, 2013 at 2:06 PM, Stephen Warren swarren@wwwdotorg.org wrote:
On 02/12/2013 01:57 PM, Tom Warren wrote:
Stephen,
On Tue, Feb 12, 2013 at 1:38 PM, Stephen Warren swarren@wwwdotorg.org wrote:
On 02/11/2013 10:17 AM, Tom Warren wrote:
tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc. Tested on Seaboard, fully functional.
Tamonten boards (medcom-wide, plutux, and tec) use a different/new dtsi file w/common settings.
diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h diff --git a/include/configs/plutux.h b/include/configs/plutux.h diff --git a/include/configs/tec.h b/include/configs/tec.h
In all 3 of those files ...
#define CONFIG_DEFAULT_DEVICE_TREE tegra20-medcom-wide
Why not change that define ...
#define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE +#undef CONFIG_ARCH_DEVICE_TREE +#define CONFIG_ARCH_DEVICE_TREE tegra20-tamonten
rather than adding that one? All the other Tegra boards only set CONFIG_DEFAULT_DEVICE_TREE.
CONFIG_DEFAULT_DEVICE_TREE is the .dts file (board/nvidia/dts). CONFIG_ARCH_DEVICE_TREE is the .dtsi file (arch/arm/dts). See Thierry's explanation, also.
So why set CONFIG_ARCH_DEVICE_TREE to tegra20-tamonten here; if that variable is supposed to point at the SoC .dtsi file, that value is wrong; it *should* be tegra20.dtsi.
Oh yuck. I see what's going on now. e.g. tegra20-medcom-wide.dts is including ARCH_CPU_DTS. It should be including tegra20-tamonten.dtsi, which then includes ARCH_CPU_DTS. The ARCH_CPU_DTS variable is supposed to only ever point at the SoC .dtsi file, not any "intermediate" .dtsi file... You probably need to put tegra20-tamonten.dtsi into board/avionic-design/dts rather than arch/arm/dts to make that work.
OK, I've removed the overrides for CONFIG_ARCH_DEVICE_TREE in the AD config files, and added 'tegra20-tamonten.dtsi' to the include line in the AD .dts files.
Great.
I have to add an include path to the DTC command line in dts/Makefile so it can find tegra20-tamonten.dtsi in arch/$(ARCH)/dts, but it all builds fine.
If you move tegra20-tamonten.dtsi to boards/avionic-design/dts, do you still need an include path? Since that file is board-/vendor-specific, it really shouldn't be in arch/arm/dts if that directory typically only contains SoC .dtsi files.
I tried both places, and had to add the include path to get it to build.
I'll try it from board/avionic-design/dts with a new include path.
Tom