Extract the information about ecc strength and ecc step size from mtd controller. This information is usefull to check if what we think as ecc is what we really configured.
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com --- cmd/nand.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/cmd/nand.c b/cmd/nand.c index e730484d0b..9a9794684b 100644 --- a/cmd/nand.c +++ b/cmd/nand.c @@ -417,12 +417,14 @@ static void nand_print_and_set_info(int idx) printf("%dx ", chip->numchips); printf("%s, sector size %u KiB\n", mtd->name, mtd->erasesize >> 10); - printf(" Page size %8d b\n", mtd->writesize); - printf(" OOB size %8d b\n", mtd->oobsize); - printf(" Erase size %8d b\n", mtd->erasesize); - printf(" subpagesize %8d b\n", chip->subpagesize); - printf(" options 0x%08x\n", chip->options); - printf(" bbt options 0x%08x\n", chip->bbt_options); + printf(" Page size %8d b\n", mtd->writesize); + printf(" OOB size %8d b\n", mtd->oobsize); + printf(" Erase size %8d b\n", mtd->erasesize); + printf(" ecc strength %8d bits\n", mtd->ecc_strength); + printf(" ecc step size %8d b\n", mtd->ecc_step_size); + printf(" subpagesize %8d b\n", chip->subpagesize); + printf(" options 0x%08x\n", chip->options); + printf(" bbt options 0x%08x\n", chip->bbt_options);
/* Set geometry info */ env_set_hex("nand_writesize", mtd->writesize);