Re: [U-Boot-Users] AT91RM9100 board with uCOS-II. What boot loader to use?

On onsdag 08 mars 2006 03.13, shuwn yuan wrote:

Uboot> setenv bootcmd cp 10020000 20008000 f818;go 20008000

But this seems not work. I can't set it successfully. It directly jump to RAM location 0x20008000 after this & I can't save the "bootcmd".

Your command is seen as two commands:

setenv bootcmd cp 10020000 20008000 f818

followed by

go 20008000

You need to escape the semicolon ';' see http://www.denx.de/wiki/view/DULG/UBootCmdGroupEnvironment#Section_5.9.6.3.

/RogerL