Hi,
-----Original Message----- From: Marek Vasut [mailto:marex@denx.de] Sent: Tuesday, May 21, 2019 6:14 PM To: Siva Durga Prasad Paladugu sivadur@xilinx.com; Jean-Jacques Hiblot jjhiblot@ti.com; lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com; u-boot@lists.denx.de; Miquel Raynal miquel.raynal@bootlin.com; Stefan Roese sr@denx.de; Tom Rini trini@konsulko.com; Ryder Lee ryder.lee@mediatek.com; Heinrich Schuchardt xypron.glpk@gmx.de; Michal Simek michals@xilinx.com; Krzysztof Kozlowski krzk@kernel.org; Maxime Ripard maxime.ripard@bootlin.com; Sven Schwermer sven@svenschwermer.de; Ramon Fried ramon.fried@gmail.com; Eugeniu Rosca roscaeugeniu@gmail.com; Vitaly Andrianov vitalya@ti.com; Joe Hershberger joe.hershberger@ni.com; Tom Warren twarren@nvidia.com Subject: Re: [U-Boot] [PATCH v2 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms
On 5/21/19 1:36 PM, Siva Durga Prasad Paladugu wrote:
Hi,
Hi,
Tested the series with one out of tree patch(https://marc.info/?l=u-boot&m=155409909828219 ) on Xilinx ZynqMP and it looks fine. We may need to finalize on https://marc.info/?l=u-boot&m=155409909828219 as well.
U-Boot 2019.04-rc4-00065-g5063fa3-dirty (May 21 2019 - 16:58:34 +0530)
Does it still work on current master (2019.07-rc) ? Testing a patch on top of rc version of previous release is not really helpful.
[...]
Its same with latest too.
U-Boot 2019.07-rc2-00182-g29792e4-dirty (May 22 2019 - 11:21:25 +0530)
Model: ZynqMP ZCU102 Rev1.0 Board: Xilinx ZynqMP DRAM: 4 GiB EL Level: EL2 Chip ID: zu9eg MMC: mmc@ff170000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Bootmode: JTAG_MODE Reset reason: EXTERNAL Net: ZYNQ GEM: ff0e0000, phyaddr c, interface rgmii-id
Warning: ethernet@ff0e0000 (eth0) using random MAC address - ca:f4:c2:4a:b8:df eth0: ethernet@ff0e0000 Hit any key to stop autoboot: 0 ZynqMP> usb start starting USB... Bus dwc3@fe200000: Register 2000440 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus dwc3@fe200000 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found ZynqMP> ls ubs 0 ZynqMP> ls usb 0 5242880 dummy.bin 133849600 Image
2 file(s), 0 dir(s)
ZynqMP> load usb 0 100000 dummy.bin 5242880 bytes read in 55 ms (90.9 MiB/s) ZynqMP>
Thanks, Siva
-- Best regards, Marek Vasut