Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC.
Based on the original U-Boot work done by Phytec.
Signed-off-by: Fabio Estevam festevam@denx.de --- arch/arm/dts/Makefile | 4 +- arch/arm/dts/imx7d-smegw01.dts | 190 +++++++++++++++++++++++++++ arch/arm/mach-imx/mx7/Kconfig | 9 ++ board/storopack/smegw01/Kconfig | 12 ++ board/storopack/smegw01/MAINTAINERS | 8 ++ board/storopack/smegw01/Makefile | 4 + board/storopack/smegw01/imximage.cfg | 100 ++++++++++++++ board/storopack/smegw01/smegw01.c | 95 ++++++++++++++ configs/smegw01_defconfig | 63 +++++++++ include/configs/smegw01.h | 63 +++++++++ 10 files changed, 546 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/imx7d-smegw01.dts create mode 100644 board/storopack/smegw01/Kconfig create mode 100644 board/storopack/smegw01/MAINTAINERS create mode 100644 board/storopack/smegw01/Makefile create mode 100644 board/storopack/smegw01/imximage.cfg create mode 100644 board/storopack/smegw01/smegw01.c create mode 100644 configs/smegw01_defconfig create mode 100644 include/configs/smegw01.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a389be98a294..3ae6758531df 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -817,8 +817,8 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7s-warp.dtb \ imx7d-meerkat96.dtb \ imx7d-pico-pi.dtb \ - imx7d-pico-hobbit.dtb - + imx7d-pico-hobbit.dtb \ + imx7d-smegw01.dtb
dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \ imx7ulp-evk.dtb diff --git a/arch/arm/dts/imx7d-smegw01.dts b/arch/arm/dts/imx7d-smegw01.dts new file mode 100644 index 000000000000..aefc654ad87d --- /dev/null +++ b/arch/arm/dts/imx7d-smegw01.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2020 PHYTEC Messtechnik GmbH +// Author: Jens Lang J.Lang@phytec.de +// Copyright (C) 2021 Fabio Estevam festevam@denx.de + +/dts-v1/; +#include "imx7d.dtsi" + +/ { + model = "Storopack SMEGW01 board"; + compatible = "storopack,imx7d-smegw01", "fsl,imx7d"; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc3; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + max-frequency = <200000000>; + bus-width = <8>; + fsl,tuning-step = <1>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + sd-uhs-ddr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c + >; + }; + + pinctrl_usdhc1: usdhc1 { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3 { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5d + MX7D_PAD_SD3_CLK__SD3_CLK 0x1d + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5e + MX7D_PAD_SD3_CLK__SD3_CLK 0x1e + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5f + MX7D_PAD_SD3_CLK__SD3_CLK 0x0f + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; +}; diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig index 5c6fe426efbe..adedc011648f 100644 --- a/arch/arm/mach-imx/mx7/Kconfig +++ b/arch/arm/mach-imx/mx7/Kconfig @@ -70,6 +70,14 @@ config TARGET_PICO_IMX7D select SUPPORT_SPL imply CMD_DM
+config TARGET_SMEGW01 + bool "smegw01" + select BOARD_LATE_INIT + select DM + select DM_THERMAL + select MX7D + imply CMD_DM + config TARGET_WARP7 bool "warp7" select BOARD_LATE_INIT @@ -94,6 +102,7 @@ source "board/compulab/cl-som-imx7/Kconfig" source "board/ronetix/imx7-cm/Kconfig" source "board/freescale/mx7dsabresd/Kconfig" source "board/novtech/meerkat96/Kconfig" +source "board/storopack/smegw01/Kconfig" source "board/technexion/pico-imx7d/Kconfig" source "board/toradex/colibri_imx7/Kconfig" source "board/warp7/Kconfig" diff --git a/board/storopack/smegw01/Kconfig b/board/storopack/smegw01/Kconfig new file mode 100644 index 000000000000..4503b65419a6 --- /dev/null +++ b/board/storopack/smegw01/Kconfig @@ -0,0 +1,12 @@ +if TARGET_SMEGW01 + +config SYS_BOARD + default "smegw01" + +config SYS_VENDOR + default "storopack" + +config SYS_CONFIG_NAME + default "smegw01" + +endif diff --git a/board/storopack/smegw01/MAINTAINERS b/board/storopack/smegw01/MAINTAINERS new file mode 100644 index 000000000000..761059859ded --- /dev/null +++ b/board/storopack/smegw01/MAINTAINERS @@ -0,0 +1,7 @@ +SMEGW01 BOARD +M: Fabio Estevam festevam@denx.de +S: Maintained +F: board/storopack/ +F: arch/arm/dts/imx7d-smegw01.dts +F: configs/smegw01_defconfig +F: include/configs/smegw01.h diff --git a/board/storopack/smegw01/Makefile b/board/storopack/smegw01/Makefile new file mode 100644 index 000000000000..f02e7bb8b007 --- /dev/null +++ b/board/storopack/smegw01/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2016 NXP Semiconductors + +obj-y := smegw01.o diff --git a/board/storopack/smegw01/imximage.cfg b/board/storopack/smegw01/imximage.cfg new file mode 100644 index 000000000000..fd69ce4ca8a9 --- /dev/null +++ b/board/storopack/smegw01/imximage.cfg @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2017 PHYTEC America, LLC + * + * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include <config.h> + +IMAGE_VERSION 2 +#ifdef CONFIG_IMX_HAB +CSF CONFIG_CSF_SIZE +#endif + +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* DDR initialization came from Phytec */ +DATA 4 0x30340004 0x4F400005 +DATA 4 0x30360388 0x40000000 +DATA 4 0x30360384 0x40000000 +DATA 4 0x30391000 0x00000002 +DATA 4 0x307a0000 0x01040001 +DATA 4 0x307a01a0 0x80400003 +DATA 4 0x307a01a4 0x00100020 +DATA 4 0x307a01a8 0x80100004 +DATA 4 0x307a0064 0x0040002b +DATA 4 0x307a0490 0x00000001 +DATA 4 0x307a00d0 0x00020083 +DATA 4 0x307a00d4 0x00690000 +DATA 4 0x307a00dc 0x09300004 +DATA 4 0x307a00e0 0x04080000 +DATA 4 0x307a00e4 0x00100004 +DATA 4 0x307a00f4 0x0000033f +DATA 4 0x307a0100 0x090b1109 +DATA 4 0x307a0104 0x0007020d +DATA 4 0x307a0108 0x03040407 +DATA 4 0x307a010c 0x00002006 +DATA 4 0x307a0110 0x04020205 +DATA 4 0x307a0114 0x03030202 +DATA 4 0x307a0120 0x00000802 +DATA 4 0x307a0180 0x00800020 +DATA 4 0x307a0184 0x02000100 +DATA 4 0x307a0190 0x02098204 +DATA 4 0x307a0194 0x00030303 +DATA 4 0x307a0200 0x00001f15 +DATA 4 0x307a0204 0x00080808 +DATA 4 0x307a0210 0x00000f0f +DATA 4 0x307a0214 0x07070707 +DATA 4 0x307a0218 0x0f0f0707 +DATA 4 0x307a0240 0x06000604 +DATA 4 0x307a0244 0x00000001 +DATA 4 0x30391000 0x00000000 +DATA 4 0x30790000 0x17420f40 +DATA 4 0x30790004 0x10210100 +DATA 4 0x30790010 0x00060807 +DATA 4 0x307900b0 0x1010007e +DATA 4 0x3079009c 0x00000d6e +DATA 4 0x30790020 0x0a0a0a0a +DATA 4 0x30790030 0x06060606 +DATA 4 0x30790050 0x01000010 +DATA 4 0x30790050 0x00000010 +DATA 4 0x307900c0 0x0e407304 +DATA 4 0x307900c0 0x0e447304 +DATA 4 0x307900c0 0x0e447306 +CHECK_BITS_SET 4 0x307900c4 0x1 +DATA 4 0x307900c0 0x0e447304 +DATA 4 0x307900c0 0x0e407304 +DATA 4 0x30384130 0x00000000 +DATA 4 0x30340020 0x00000178 +DATA 4 0x30384130 0x00000002 +DATA 4 0x30790018 0x0000000f +CHECK_BITS_SET 4 0x307a0004 0x1 diff --git a/board/storopack/smegw01/smegw01.c b/board/storopack/smegw01/smegw01.c new file mode 100644 index 000000000000..e6bff80e5565 --- /dev/null +++ b/board/storopack/smegw01/smegw01.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2021 Fabio Estevam festevam@denx.de + +#include <init.h> +#include <net.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx7-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/global_data.h> +#include <asm/gpio.h> +#include <asm/mach-imx/hab.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/io.h> +#include <common.h> +#include <env.h> +#include <asm/arch/crm_regs.h> +#include <asm/setup.h> +#include <asm/bootm.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \ + PAD_CTL_HYS) + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +static iomux_v3_cfg_t const wdog_pads[] = { + MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart1_pads[] = { + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +}; + +static int setup_fec(void) +{ + struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + int ret; + + /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/ + clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], + (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK | + IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0); + + ret = set_clk_enet(ENET_125MHZ); + if (ret) + return ret; + + return 0; +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + setup_fec(); + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int board_late_init(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset(wdog); + + /* + * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), + * since we use PMIC_PWRON to reset the board. + */ + clrsetbits_le16(&wdog->wcr, 0, 0x10); + + return 0; +} diff --git a/configs/smegw01_defconfig b/configs/smegw01_defconfig new file mode 100644 index 000000000000..aa10577a9f3f --- /dev/null +++ b/configs/smegw01_defconfig @@ -0,0 +1,63 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0xa0000000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0xC0000 +CONFIG_DM_GPIO=y +CONFIG_TARGET_SMEGW01=y +CONFIG_ARMV7_BOOT_SEC_DEFAULT=y +# CONFIG_ARMV7_VIRT is not set +CONFIG_IMX_RDC=y +CONFIG_IMX_BOOTAUX=y +CONFIG_DEFAULT_DEVICE_TREE="imx7d-smegw01" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/storopack/smegw01/imximage.cfg" +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BOOTD is not set +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_BOUNCE_BUFFER=y +CONFIG_DFU_MMC=y +CONFIG_DM_I2C=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_FSL_USDHC=y +CONFIG_MTD=y +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_FEC_MXC=y +CONFIG_RGMII=y +CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX7=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y +CONFIG_IMX_THERMAL=y diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h new file mode 100644 index 000000000000..50f00136ac46 --- /dev/null +++ b/include/configs/smegw01.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016 NXP Semiconductors + * Copyright (C) 2021 Fabio Estevam festevam@denx.de + * + * Configuration settings for the smegw01 board. + */ + +#ifndef __SMEGW01_CONFIG_H +#define __SMEGW01_CONFIG_H + +#include "mx7_common.h" +#include <imximage.h> + +#define PHYS_SDRAM_SIZE SZ_512M + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) + +/* MMC Config*/ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "fdtfile=imx7d-smegw01.dtb\0" \ + "fdt_addr=0x83000000\0" \ + "bootm_size=0x10000000\0" \ + "mmcdev=0\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "fi;\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if run loadimage; then " \ + "run mmcboot; " \ + "fi; " \ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#endif