Adds a driver for the apollolake Primary-to-sideband bus. This supports various child devices. It supposed both device tree and of-platdata.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/x86/cpu/apollolake/Makefile | 1 + arch/x86/cpu/apollolake/p2sb.c | 167 +++++++++++++++++++++++++++++++ 2 files changed, 168 insertions(+) create mode 100644 arch/x86/cpu/apollolake/p2sb.c
diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile index f6b8caafd33..973f552cc7f 100644 --- a/arch/x86/cpu/apollolake/Makefile +++ b/arch/x86/cpu/apollolake/Makefile @@ -15,6 +15,7 @@ obj-y += gpio.o obj-y += hostbridge.o obj-y += itss.o obj-y += lpc.o +obj-y += p2sb.o obj-y += pch.o obj-y += pmc.o obj-y += uart.o diff --git a/arch/x86/cpu/apollolake/p2sb.c b/arch/x86/cpu/apollolake/p2sb.c new file mode 100644 index 00000000000..5bb093361f8 --- /dev/null +++ b/arch/x86/cpu/apollolake/p2sb.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Primary-to-Sideband Bridge + * + * Copyright 2019 Google LLC + */ + +#define LOG_CATEGORY UCLASS_P2SB + +#include <common.h> +#include <dm.h> +#include <dt-structs.h> +#include <p2sb.h> +#include <spl.h> +#include <asm/pci.h> + +struct p2sb_platdata { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_intel_apl_p2sb dtplat; +#endif + ulong mmio_base; + pci_dev_t bdf; +}; + +/* PCI config space registers */ +#define HPTC_OFFSET 0x60 +#define HPTC_ADDR_ENABLE_BIT (1 << 7) + +/* High Performance Event Timer Configuration */ +#define P2SB_HPTC 0x60 +#define P2SB_HPTC_ADDRESS_ENABLE (1 << 7) + +/* + * ADDRESS_SELECT ENCODING_RANGE + * 0 0xfed0 0000 - 0xfed0 03ff + * 1 0xfed0 1000 - 0xfed0 13ff + * 2 0xfed0 2000 - 0xfed0 23ff + * 3 0xfed0 3000 - 0xfed0 33ff + */ +#define P2SB_HPTC_ADDRESS_SELECT_0 (0 << 0) +#define P2SB_HPTC_ADDRESS_SELECT_1 (1 << 0) +#define P2SB_HPTC_ADDRESS_SELECT_2 (2 << 0) +#define P2SB_HPTC_ADDRESS_SELECT_3 (3 << 0) + +/* + * apl_p2sb_early_init() - Enable decoding for HPET range + * + * This is needed for FspMemoryInit to store and retrieve a global data + * pointer + * + * @dev: P2SB device + * @return 0 if OK, -ve on error + */ +static int apl_p2sb_early_init(struct udevice *dev) +{ + struct p2sb_platdata *plat = dev_get_platdata(dev); + pci_dev_t pdev = plat->bdf; + + /* + * Enable decoding for HPET memory address range. + * HPTC_OFFSET(0x60) bit 7, when set the P2SB will decode + * the High Performance Timer memory address range + * selected by bits 1:0 + */ + pci_x86_write_config(pdev, HPTC_OFFSET, HPTC_ADDR_ENABLE_BIT, + PCI_SIZE_8); + + /* Enable PCR Base address in PCH */ + pci_x86_write_config(pdev, PCI_BASE_ADDRESS_0, plat->mmio_base, + PCI_SIZE_32); + pci_x86_write_config(pdev, PCI_BASE_ADDRESS_1, 0, PCI_SIZE_32); + + /* Enable P2SB MSE */ + pci_x86_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY, PCI_SIZE_8); + + return 0; +} + +static int apl_p2sb_spl_init(struct udevice *dev) +{ + /* Enable decoding for HPET. Needed for FSP global pointer storage */ + dm_pci_write_config(dev, P2SB_HPTC, P2SB_HPTC_ADDRESS_SELECT_0 | + P2SB_HPTC_ADDRESS_ENABLE, PCI_SIZE_8); + + return 0; +} + +int apl_p2sb_ofdata_to_platdata(struct udevice *dev) +{ + struct p2sb_uc_priv *upriv = dev_get_uclass_priv(dev); + struct p2sb_platdata *plat = dev_get_platdata(dev); + +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + int ret; + + if (spl_phase() == PHASE_TPL) { + u32 base[2]; + + /* TPL sets up the initial BAR */ + ret = dev_read_u32_array(dev, "early-regs", base, + ARRAY_SIZE(base)); + if (ret) + return log_msg_ret("Missing/short early-regs", ret); + plat->mmio_base = base[0]; + plat->bdf = pci_x86_get_devfn(dev); + if (plat->bdf < 0) + return log_msg_ret("Cannot get p2sb PCI address", + plat->bdf); + } else { + plat->mmio_base = dev_read_addr_pci(dev); + /* Don't set BDF since it should not be used */ + if (plat->mmio_base == FDT_ADDR_T_NONE) + return -EINVAL; + } +#else + plat->mmio_base = plat->dtplat.early_regs[0]; + plat->bdf = pci_x86_ofplat_get_devfn(plat->dtplat.reg[0]); +#endif + upriv->mmio_base = plat->mmio_base; + debug("p2sb: mmio_base=%x\n", (uint)plat->mmio_base); + + return 0; +} + +static int apl_p2sb_probe(struct udevice *dev) +{ + if (spl_phase() == PHASE_TPL) + return apl_p2sb_early_init(dev); + else if (spl_phase() == PHASE_SPL) + return apl_p2sb_spl_init(dev); + + return 0; +} + +static int p2sb_child_post_bind(struct udevice *dev) +{ +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct p2sb_child_platdata *pplat = dev_get_parent_platdata(dev); + int ret; + u32 pid; + + ret = dev_read_u32(dev, "intel,p2sb-port-id", &pid); + if (ret) + return ret; + pplat->pid = pid; +#endif + + return 0; +} + +static const struct udevice_id apl_p2sb_ids[] = { + { .compatible = "intel,apl-p2sb" }, + { } +}; + +U_BOOT_DRIVER(apl_p2sb_drv) = { + .name = "intel_apl_p2sb", + .id = UCLASS_P2SB, + .of_match = apl_p2sb_ids, + .probe = apl_p2sb_probe, + .ofdata_to_platdata = apl_p2sb_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct p2sb_platdata), + .per_child_platdata_auto_alloc_size = + sizeof(struct p2sb_child_platdata), + .child_post_bind = p2sb_child_post_bind, +};