On 03.04.19 13:08, Eugen.Hristev@microchip.com wrote:
On 02.04.2019 11:57, Stefan Roese wrote:
This patch adds the CONFIG_SPL_IMAGE option to select the SPL image that shall be used to generate the combined SPL + U-Boot image. The default value is the current value "spl/u-boot-spl.bin".
This patch also sets CONFIG_SPL_IMAGE to "spl/boot.bin" for AT91 targets which use SPL NAND support (boot from NAND). For these build targets the combined image "u-boot-with-spl.bin" is now automatically generated and can be programmed into NAND as one single image (vs. SPL image and U-Boot as 2 separate images).
Signed-off-by: Stefan Roese sr@denx.de Cc: Heiko Schocher hs@denx.de Cc: Andreas Bießmann andreas@biessmann.org Cc: Eugen Hristev eugen.hristev@microchip.com Reviewed-by: Heiko Schocher hs@denx.de Tested on the taurus board: Tested-by: Heiko Schocher hs@denx.de
v3:
- No change
v2:
No change
Kconfig | 10 ++++++++++ Makefile | 4 +++- 2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig index 305b265ed7..7c2b86f1f3 100644 --- a/Kconfig +++ b/Kconfig @@ -224,6 +224,15 @@ config BUILD_ROM which are not shipped in the U-Boot source tree. Please, see doc/README.x86 for details.
+config SPL_IMAGE
- string "SPL image filename that is generated"
- default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
- default "spl/u-boot-spl.bin"
- help
The SPL image filename that is generated by the build process.This image might be used to generated a combined image withSPL and main U-Boot proper as well.Hi Stefan,
If I try to just use menuconfig and change this value to something else, build fails. The purpose of this Kconfig is to name the SPL filename as per the config's desire ?
Or in fact is "which binary file to use to make the Combined SPL+U-BOOT mega image" ?
Its not meant to change the SPL image filename to an arbitrary name. Its meant to select one of the already supported values of the build system. I should probably re-phrase the Kconfig text to better reflect this.
Thanks, Stefan