On Mon, Feb 13, 2023 at 2:30 PM Chris Morgan macroalpha82@gmail.com wrote:
From: Chris Morgan macromorgan@hotmail.com
Add gpio-ranges property to GPIO nodes so that the bank ID can be correctly derived for each GPIO bank.
Should not it be merged into linux first? Otherwise it will be overwritten during the next dts sync with linux.
Signed-off-by: Chris Morgan macromorgan@hotmail.com
arch/arm/dts/rk356x.dtsi | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi index 5706c3e24f..6492ace0de 100644 --- a/arch/arm/dts/rk356x.dtsi +++ b/arch/arm/dts/rk356x.dtsi @@ -1806,6 +1806,7 @@ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; gpio-controller;
gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;@@ -1817,6 +1818,7 @@ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; gpio-controller;
gpio-ranges = <&pinctrl 0 32 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;@@ -1828,6 +1830,7 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; gpio-controller;
gpio-ranges = <&pinctrl 0 64 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;@@ -1839,6 +1842,7 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; gpio-controller;
gpio-ranges = <&pinctrl 0 96 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;@@ -1850,6 +1854,7 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; gpio-controller;
gpio-ranges = <&pinctrl 0 128 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;-- 2.34.1