On 05/28/2015 02:24 AM, Prabhakar Kushwaha wrote:
From: Stuart Yoder stuart.yoder@freescale.com
The agreed split of the top of memory is 256M for debug server and 256M for MC. This patch implements the split.
In addition, the MC mem must be 512MB aligned, so the amount of memory to hide must be 512MB to achieve that alignment.
Signed-off-by: Stuart Yoder stuart.yoder@freescale.com Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com
Changes for v2: sending as it is for patch set
<snip>
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index a33b8a9..214d790 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -163,21 +163,27 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
/* Debug Server firmware */ -#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) /* 2 sec timeout */ #define CONFIG_SYS_DEBUG_SERVER_TIMEOUT (2 * 1000 * 1000)
/* MC firmware */ #define CONFIG_FSL_MC_ENET -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
-/* Carve out a DDR region which will not be used by u-boot/Linux */ +/*
- Carve out a DDR region which will not be used by u-boot/Linux
- It will be used by MC and Debug Server. The MC region must be
- 512MB aligned, so the min size to hide is 512MB.
- */
#if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER) +#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) +#define CONFIG_SYS_MEM_TOP_HIDE_MIN (512UL * 1024 * 1024) #define CONFIG_SYS_MEM_TOP_HIDE get_dram_size_to_hide()
The new macro should be documented.
York