Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD and USB) and execute autoboot script.
Signed-off-by: Bhaskar Upadhaya Bhaskar.Upadhaya@nxp.com Signed-off-by: Rajesh Bhagat rajesh.bhagat@nxp.com --- Depends on: http://patchwork.ozlabs.org/patch/808617/
Changes in v2: - Removed the extra "" character from macro definition - Dropped the #if for CONFIG_BOOTCOMMAND
configs/ls1012afrdm_qspi_defconfig | 1 + include/configs/ls1012afrdm.h | 57 ++++++++++++++++++++++++++++++++------ 2 files changed, 49 insertions(+), 9 deletions(-)
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index fe95f04..42acff0 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -46,3 +46,4 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y +CONFIG_DISTRO_DEFAULTS=y diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 6b1ba57..4d6448b 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -20,16 +20,55 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff
+#ifndef CONFIG_SPL_BUILD +#undef BOOT_TARGET_DEVICES +#define BOOT_TARGET_DEVICES(func) \ + func(USB, usb, 0) +#endif + #undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=no\0" \ - "loadaddr=0x80100000\0" \ - "kernel_addr=0x100000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0xa00000\0" \ - "kernel_load=0x96000000\0" \ - "kernel_size=0x2800000\0" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x96000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0x96000000\0" \ + "kernel_size=0x2800000\0" \ + "console=ttyS0,115200\0" \ + BOOTENV \ + "boot_scripts=ls1012afrdm_boot.scr\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "installer=load usb 0:2 $load_addr " \ + "/flex_installer_arm64.itb; " \ + "bootm $load_addr#$board\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_addr $kernel_size && bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
/* * USB