Hi
I have started working with UBOOT on a custom board with Ultrascale+. I am working with UBoot Xilinx Release 2024.1
Using a SD card, I managed to boot Linux and network is OK under Linux
I would like to be able to use network under UBoot
PHY is a marvell 88E1510. CONFIG_PHY_MARVELL is set and marvell.c is compiled.
In the dts file, I set a compatible marvel 88E1510 entry. Unfortunately, I get a "Could not get PHY for eth0" when booting.
Adding some trace in marvell.c I see that init function is not called. I also add some trace in \drivers\core\root.c and \drivers\core\lists.c, I see that UBoot looks for a compatible driver for the marvell but it does not find it. I have printed all the drivers that are compared in driver_check_compatible and there is no marvell driver.
I have the feeling that only the drivers declared with U_BOOT_DRIVER are shown and not the ones with U_BOOT_PHY_DRIVER. Is it right ? If so, how can I register and use the driver for my Marvell PHY ?
Thanks