On 08/21/2018 09:16 AM, Bin Meng wrote:
Hi Marek,
On Tue, Aug 21, 2018 at 1:43 PM, Marek Vasut marek.vasut@gmail.com wrote:
On 08/21/2018 06:56 AM, Bin Meng wrote: [...]
> The proposal I made is: > > * Keep pci-uclass driver's post_bind() and child_post_bind() only for > Sandbox configuration > * Keep the call to pci_bus_find_devfn() in pci_bind_bus_devices() only > for Sandbox configuration > * Sandbox is special. We should limit the mechanism of matching PCI > emulation device via "compatible" to sandbox only
The above three points can be done separately and I don't care about this too much.
That's my concern. Only doing this created confusing and incomplete design.
Incomplete how ?
I explained several times. I have to repeat here once again:
Currently U-Boot supports two scenarios for PCI driver binding:
- Declare a PCI device in the device tree. That requires specifying a
'compatible' string as well as 'reg' property as defined by the 'PCI Bus Binding' spec. DM uses the 'compatible' string to bind the driver for the device.
- Don't declare a PCI device in the device tree. Instead, using
U_BOOT_PCI_DEVICE() to declare a device and driver mapping.
You are creating a 3rd scenario which is a mix up of both scenario#1 and #2 in this patch, yet without any documentation, plus any additional changes to impacted drivers.
I am extending both, it's not a "third scenario".
I said in the previous discussion I am willing to update the documentation to match the implementation, but that's about it.
So far almost all PCI device drivers in U-Boot supports both scenarios, except PCI UART which currently only supports scenario#1. If you declare what you do in this patch is pureblood then you should revoke the other 2 at the same time. Leaving such in the mainstream only creates chaos in the future and we should avoid doing that, given we already had lots of discussion here.
No. The compatible is valid for some PCI subdevs, ie. bridges, so that has to stay. You also need compatible for sandbox, you said that yourself. And declaring a PCI device with BFD in DT is needed, ie. for the r8a7794-style bindings.
OK, now new comments :) So you admit "compatible" can be valid for some cases.
_some_ select ones, and that is a _very_ important distinction.
I have to point out that your theory on PCI device probing is self-contradictory.You refuse to add a "compatible" string to your PCI device because you said the vendor/device id/class provides enough information to bind the driver, then why do you want to specify your devices in the device tree in the first place.
Because of the USB PHY , which is attached to that device and can not be probed on the PCI bus, unlike the device itself ?
According to your theory, "Each PCI device already has a PCI ID and class which is used to identify it and based on which the drivers bind to it, so a DT compatible is NOT needed and is actually redundant and harmful.", I would argue why not just creating a dedicate PCI device driver using PCI ID and class information to do the driver binding and start from there.
Because the same device with the same PCI ID can be used without that PHY .
As you mentioned PCI bus is probable bus like USB, everything can be self-contained in the PCI device driver itself. There is no need to create nothing in the device tree. If you want an example, check 8250_pci.c in the Linux kernel. Everything that is needed to configure the driver is included in the driver itself. It does not read anything from the device tree.
Well, see above for why this approach doesn't work.
So again, how is the state of PCI more incomplete with this patch than without it ?
Yes, you probably don't care about this. But I care about this as it impacts some other things like PCI uart driver which is used by some x86 boards.
Sandbox changes impact PCI UART driver and x86 boards how ?
See above. It's not about sandbox!
So what is it about ? And how does this core change impact anything ? Does it change behavior for some board or break some tests for you ?
> * Create DM PCI test case against the DT node assignment > * Remove all compatible string in U-Boot's PCI device drivers: eg: > ehci_pci_ids[], xhci_pci_ids[], etc. IOW, all PCI device drivers > should only use U_BOOT_PCI_DEVICE(), aka the original U-Boot option 2 > * Fork a "pci-ns16550" driver to support U_BOOT_PCI_DEVICE(), as > currently PCI ns16550 device driver uses "compatible" string to do the > matching, and update crownbay.dts and galileo.dts (so far I only know > two boards are using PCI ns16550 serial port) > * Make sure all DM PCI test cases are not broken > * Document all of the above changes in doc/driver-model/pci-info.txt
I think you're just adding completely orthogonal stuff to this 5-liner patch into the list and overly complicate the situation. Sure, if you want to do all this, go ahead, but I don't see how this prevents this particular patch from being applied , except maybe for the documentation tweak.
Please, think from the maintainer perspective. It's nothing related to number of LOCs. It's that we need create a clean design. You probably don't want someone just submits a single patch that changed current USB design without a full consideration on all possible impacts.
OK, after reading all this, what I gather from the discussion is that this patch somehow breaks the design or the other platforms, which is why you fight against it so much. Does it, yes or no? And if so, you still failed to explain how, so, how ?
You did not answer this question.
It's too early to go testing at this point because we are still discussing the design.
OK, so basically you didn't even try this patch to see if it actually has any impact anywhere. Sigh ...
BTW your patch does not check the return value of ofnode_get_addr_size(). It's possible to write a DT without "reg" property in a device node.
That would be invalid DT, since you won't be able to match on the BFD. But that check can be added in V2.
Improving sandbox and x86 PCI handling is orthogonal to this change, so are ns16550 driver improvements and if you want to work on them, nothing prevents you from doing so.
First of all, it's not x86 PCI handling. It's PCI device driver clean up to match the new design.
It is not a new design, just an extension of the current one.
Driver cleanups where you match on PCI IDs or classes instead of compatible strings are completely orthogonal to this change, you don't even need this patch to do such a cleanup. Same applies for the x86 DT cleanup, you don't need this patch for those either.
Why would I? If there is no design changes, the clean up work to current drivers is out of the question as these drivers are supported user cases by current U-Boot PCI implementation.
Then leave them as is. But don't request unrelated cleansup from me either. I really do not understand why I should do those cleanups to get in an completely unrelated patch, that's just nonsense.
[...]