Hi Baruch,
On Sun, Nov 18, 2018 at 6:29 PM Baruch Siach baruch@tkos.co.il wrote:
Hi Ricardo,
Ricardo Salveti writes:
The line where it locks up waiting for the command to complete: http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/mmc/fsl_esdhc.c;h=3cdfa7f5...
Unclear why this only happens with this som/soc, maybe hardware/errata differences?
Let me know if you need any extra info.
I'll take a look tomorrow.
Can you reproduce this hang with these binary images:
https://images.solid-build.xyz/IMX6/U-Boot/spl-imx6-sdhc.bin https://images.solid-build.xyz/IMX6/U-Boot/u-boot-imx6-sdhc.img
Yup, looks like it hangs at the same place:
U-Boot SPL 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:59:22) Trying to boot from MMC1
U-Boot 2018.01-02296-g457cdd60c3 (May 17 2018 - 22:59:22 +0200), Build: jenkins-u-boot-imx6-variant=sdhc-2
CPU: Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 26C Reset cause: POR Board: MX6 HummingBoard2 Watchdog enabled DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial ---> hangs Cheers, -- Ricardo Salveti de Araujo