For use dwmmc controller, add SDMMC4 gpio configuration.
Signed-off-by: Beomho Seo beomho.seo@samsung.com Signed-off-by: Jaehoon Chung jh80.chung@samsung.com Cc: Minkyu Kang mk7.kang@samsung.com --- arch/arm/cpu/armv7/exynos/pinmux.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 645c497..a67664f 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -623,16 +623,25 @@ static int exynos4_mmc_config(int peripheral, int flags) struct exynos4_gpio_part2 *gpio2 = (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); struct s5p_gpio_bank *bank, *bank_ext; + unsigned int func, func_ext = 0; int i;
switch (peripheral) { case PERIPH_ID_SDMMC0: bank = &gpio2->k0; bank_ext = &gpio2->k1; + func = GPIO_FUNC(0x2); + func_ext = GPIO_FUNC(0x3); break; case PERIPH_ID_SDMMC2: bank = &gpio2->k2; - bank_ext = &gpio2->k3; + func = GPIO_FUNC(0x2); + break; + case PERIPH_ID_SDMMC4: + bank = &gpio2->k0; + bank_ext = &gpio2->k1; + func = GPIO_FUNC(0x3); + func_ext = GPIO_FUNC(0x4); break; default: return -1; @@ -640,13 +649,14 @@ static int exynos4_mmc_config(int peripheral, int flags) for (i = 0; i < 7; i++) { if (i == 2) continue; - s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(bank, i, func); s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); } - if (flags & PINMUX_FLAG_8BIT_MODE) { + if ((flags & PINMUX_FLAG_8BIT_MODE) && + ~(peripheral & PERIPH_ID_SDMMC2)) { for (i = 3; i < 7; i++) { - s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(bank_ext, i, func_ext); s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE); s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); } @@ -710,10 +720,10 @@ static int exynos4_pinmux_config(int peripheral, int flags) break; case PERIPH_ID_SDMMC0: case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC4: return exynos4_mmc_config(peripheral, flags); case PERIPH_ID_SDMMC1: case PERIPH_ID_SDMMC3: - case PERIPH_ID_SDMMC4: debug("SDMMC device %d not implemented\n", peripheral); return -1; default: