On 4/24/19 8:30 AM, AKASHI Takahiro wrote:
This patch set is an attempt to implement non-volatile attribute for UEFI variables. Under the current implementation,
- SetVariable API doesn't recognize non-volatile attribute
- While some variables are defined non-volatile in UEFI specification, they are NOT marked as non-volatile in the code.
- env_save() (or "env save" command) allows us to save all the variables into persistent storage, but it may cause volatile UEFI variables, along with irrelevant U-Boot variables, to be saved unconditionally.
Those observation rationalizes that the implementation of UEFI variables should be revamped utilizing dedicated storage for them.
This patch set is yet experimental and rough-edged(See known issues below), but shows how UEFI variables can be split from U-Boot environment. This enhancement will also be vital when we introduce UEFI secure boot where secure and tamper-resistant storage (with authentication) is required.
Usage: To enable this feature, the following configs must be enabled: CONFIG_ENV_IS_IN_FAT CONFIG_ENV_FAT_INTERFACE CONFIG_ENV_EFI_FAT_DEVICE_AND_PART CONFIG_ENV_EFI_FAT_FILE
You can also define a non-volatile variable from command interface: => setenv -e -nv FOO baa
Known issues/restriction:
- UEFI spec defines "globally defined variables" with specific attributes, but with this patch, we don't check against the user-supplied attribute for any variable.
- Only FAT can be enabled for persistent storage for UEFI non-volatile variables.
- The whole area of storage will be saved at every update of one variable. It can be optimized.
- An error during saving may cause inconsistency between cache (hash table) and the storage.
- Cache is of fixed size and can be quite big for normal usage.
Hello Takahiro,
thanks a lot for looking into persisting non-volatile UEFI variables.
Before diving into the details of the patches let us discuss the overall design.
My understanding is that we need a buffer that lives in EFI_RUNTIME_SERVICES_DATA and holds all variables. It is this buffer that the operating system will access when getting or setting variables.
If a non-volatile variable is set via SetVariable() we will call a backend driver.
Our current backend is using U-Boot environment variables. It can only be accessed at boottime. Currently there is no guarantee that the U-Boot variables are saved before booting. So it does not support persisting non-volatile variables reliably.
Your patch series supplies a new backend using a file for persisting non-volatile variables. It can only be accessed at boottime. Essentially this solution requires no restriction to FAT file systems. We could as well use the EXT4 driver for reading or writing the file. This file storage is completely independent of the U-Boot environment. So it shall not involve any changes to files env/*. I think a documentation of the file format provided in a README would be helpful.
In case of both backends we would return EFI_UNSUPPORTED when trying to set a non-volatile variable at runtime. Setting a volatile variable at runtime should be allowable as long as we have sufficient space in our buffer.
We can remove these backends based on the EVT_SIGNAL_EXIT_BOOT_SERVICES event.
A future backend may support persisting non-volatile variables at runtime.
I would prefer if we could first introduce patches that provide the buffer for EFI variables and link it to the UEFI variable based backend before adding the new backend as alternative.
Best regards
Heinrich
Patch#1 to #4 are preparatory so that we won't rely on U-Boot environment, that is, env_get/set() helper functions. Patch#5 to #8 are core part of changes. Patch#9 to #11 are for modifying variable attributes.
Changes in v2 (Apr 24, 2019)
- rebased on efi-2019-07
- revamp the implementation
v1 (Nov 28, 2018)
- initial
AKASHI Takahiro (11): lib: charset: add u16_strcmp() lib: charset: add u16_strncmp() cmd: efidebug: rework "boot dump" sub-command using GetNextVariableName() efi_loader: set OsIndicationsSupported at init env: save UEFI non-volatile variables in dedicated storage efi_loader: variable: support non-volatile attribute efi_loader: variable: split UEFI variables from U-Boot environment efi_loader: load saved non-volatile variables at init efi_loader: bootmgr: handle BootNext as non-volatile cmd: env: add -nv option for UEFI non-volatile variable cmd: efidebug: make some boot variables non-volatile
cmd/bootefi.c | 4 - cmd/efidebug.c | 95 +++++++++++----- cmd/nvedit.c | 3 +- cmd/nvedit_efi.c | 15 ++- env/Kconfig | 34 ++++++ env/env.c | 98 ++++++++++++++++- env/fat.c | 109 +++++++++++++++++++ include/asm-generic/global_data.h | 1 + include/charset.h | 10 ++ include/environment.h | 24 +++++ lib/charset.c | 23 ++++ lib/efi_loader/efi_bootmgr.c | 3 +- lib/efi_loader/efi_setup.c | 13 +++ lib/efi_loader/efi_variable.c | 174 ++++++++++++++++++++++++++++-- 14 files changed, 560 insertions(+), 46 deletions(-)