Hey Shami, I help you to see the mail on 4xx, but don't send mails from my id. No more access my Id. ok
Regards, Raj.
--- raj ubootimage@yahoo.co.in wrote:
--- Stefan Roese sr@denx.de wrote:
On Friday 21 December 2007, shami Allam wrote:
Thanks for the information. But I read some
where
that for the Lab testing
purpose that I can give the IP address!!!!!
Please don't mix up ethernet address (== MAC address) and IP address. Of course you can set ip addresses (and should if you don't use dhcp/bootp). But you have to configure valid ethernet addresses
too.
If you don't have an ethernet address pool, you can use the "tools/gen_eth_addr" tool to create a random valid eth address for testing.
I am able to read the PHY inforamtion by command mii info 0x01<PHY Addr>.
Following is the info....
=> mii info 0x01 PHY_PHYIDR2 @ 0x1 = 0x5c90 PHY_PHYIDR[1,2] @ 0x1 = 0x20005c90 PHY_BMCR value is 0x2100 PHY 0x01: OUI = 0x80017, Model = 0x09, Rev =
0x00,
100baseT, FDX
And what does "mii info" show (without parameter)?
PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY_PHYIDR2 @ 0x17 = 0x5c90 PHY_PHYIDR[1,2] @ 0x17 = 0x20005c90 PHY_BMCR value is 0x2100 PHY 0x17: OUI = 0x80017, Model = 0x09, Rev = 0x00, 100baseT, FDX PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed PHY ID register 2 read failed =>
What is the value of CONFIG_PHY_ADDR in your board config file?
#define CONFIG_PHY_ADDR 1/* PHY address*/
Best regards,
Regards, Shami.
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de
=====================================================================
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Download prohibited? No problem. CHAT from anybrowser, without download. Go to http://in.messenger.yahoo.com/webmessengerpromo.php/
Save all your chat conversations. Find themonline at http://in.messenger.yahoo.com/webmessengerpromo.php
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Did you know? You can CHAT without downloading messenger. Go to http://in.messenger.yahoo.com/webmessengerpromo.php/