Hi Johnson,
i'm also facing the same problem in MPC8313 board with u-boot-1.1.6. if you have any fix pleas send me
Thanks Rudresh
Johnson, Justin M (GE Infra, Energy) wrote:
I ported U-Boot 1.1.6 to a custom board I am having trouble getting the TSECs to work. I am using an MPC8343 with the reduced interface, and a National Semiconductor DP83848 PHY. When I do a ping, I get the following result:
=> ping 192.168.0.100 Trying TSEC0 Speed: 100, full duplex Using TSEC0 device TSEC0: tsec: tx error TSEC0: tsec: tx buffers full ping failed; host 192.168.0 is not alive =>
When I try with the Freescale evaluation board running U-Boot 1.1.3, it works, so I am fairly confident of the network IP addresses, etc.
=> ping 192.168.0.100 Speed: 100, full duplex Using Freescale TSEC0 device host 192.168.0.100 is alive =>
I am new to all of this and an not sure what I am forgetting to set up. My board's config file is based on the MPC8349ADS.h file. I have read the README file and searched the mailing list, but haven't found (or completely missed) what I need. Below are some register values at the time the Tx Error occurred. Any help will be greatly appreciated.
***General Control and Status Registers (0x2_n000) Interrupt Event..........................: 00000400 Interrupt Mask...........................: 00000000 Error Disabled...........................: 00000000 Ethernet Control.........................: 00001018 Minimum Frame Length ....................: 00000040 Pause Time Value.........................: 00000000 DMA Control..............................: 000000C3 TBI PHY Address..........................: 0000001F
***Transmit Control and Status Registers (0x2_n100) Transmit Control.........................: 00000000 Transmit Status..........................: 00000000 Tx BD Data Length........................: 00000000 Current TxBD Pointer.....................: 00000000 TxBD Pointer.............................: 0FFFAB18 TxBD Base Address........................: 0FFFAB18 Out of Sequence TxBD.....................: 08000000 Out of Sequence Tx Data Buffer Pointer...: 00000000
***MAC Registers (0x2_n500) MAC Configuration #1.....................: 00000005 MAC Configuration #2.....................: 00007105 Inter Packet Gap/Inter Frame Gap.........: 40605060 Half-duplex..............................: 00A1F037 Maximum Frame............................: 00000600 MII Management: Configuration............: 00000003 MII Management: Command .................: 00000001 MII Management: Address..................: 00001E10 MII Management: Control..................: 00000001 MII Management: Status...................: 00000115 MII Management: Indicators...............: 00000000 Interface Status.........................: 00000008 Station Address, part 1..................: 1B5B0046 Station Address, part 2..................: E0000000
Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=D... _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users