On 04.05.2016 11:45, Chin Liang See wrote:
On Wed, 2016-05-04 at 09:41 +0200, Stefan Roese wrote:
On 03.05.2016 22:51, Marek Vasut wrote:
Some devices, like the SanDisk Cruzer Pop need some time to process the Set Configuration request, so wait a little until they are ready.
Signed-off-by: Marek Vasut marex@denx.de Cc: Chin Liang See clsee@altera.com Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Hans de Goede hdegoede@redhat.com Cc: Stefan Roese sr@denx.de Cc: Stephen Warren swarren@nvidia.com
common/usb.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/common/usb.c b/common/usb.c index 63429d4..205041b 100644 --- a/common/usb.c +++ b/common/usb.c @@ -1107,6 +1107,14 @@ int usb_select_config(struct usb_device *dev) "len %d, status %lX\n", dev->act_len, dev ->status); return err; }
- /*
* Wait until the Set Configuration request gets processedby the
* device. This is required by at least SanDisk Cruzer PopUSB 2.0
* and Kingston DT Ultimate 32GB USB 3.0 on DWC2 OTGcontroller.
*/- mdelay(10);
- debug("new device strings: Mfr=%d, Product=%d,
SerialNumber=%d\n", dev->descriptor.iManufacturer, dev ->descriptor.iProduct, dev->descriptor.iSerialNumber);
As you might have expected, I'm not a fan of adding new delays to the common USB code. As this negatively affects all platforms. Did you test these two sticks that require this delay on other platforms than SoCFPGA? I would be very interested to know, if these keys are successfully detected without this patch on other platforms. I don't have access to these USB keys, so I can't test it on my platforms.
Actually this series of patches (include the delay) help for all my problematic pen drives too. It sound to me these pen drives need time to process.
This delay (I'm talking mainly about the 1000ms delay per USB hub in patch 7/7) does not seem to be necessary on other platforms.
Chin, could you please test again without this patch 7/7 but with "usb_pgood_delay" set to 1000? And let us know if this also fixes all the problems with your problematic pen drives? That would be very helpful.
Thanks, Stefan