Subject: [PATCH 2/2] mx6ul_evk: Remove FEC related board code
mx6ul_evk uses DM_ETH, so there is no need to have board code to setup the FEC IOMUX and to register the network ports via the old board_eth_init() method.
Remove these FEC related pieces of code.
Signed-off-by: Fabio Estevam festevam@gmail.com
Reviewed-by: Peng Fan peng.fan@nxp.com
.../mx6ul_14x14_evk/mx6ul_14x14_evk.c | 50 ------------------- 1 file changed, 50 deletions(-)
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 086e0e6739..6b87f5c1b0 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -196,56 +196,6 @@ int board_ehci_hcd_init(int port) #endif
#ifdef CONFIG_FEC_MXC -/*
- pin conflicts for fec1 and fec2, GPIO1_IO06 and GPIO1_IO07 can only
- be used for ENET1 or ENET2, cannot be used for both.
- */
-static iomux_v3_cfg_t const fec1_pads[] = {
- MX6_PAD_GPIO1_IO06__ENET1_MDIO |
MUX_PAD_CTRL(MDIO_PAD_CTRL),
- MX6_PAD_GPIO1_IO07__ENET1_MDC |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_TX_EN__ENET1_TX_EN |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 |
MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
- MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_RX_ER__ENET1_RX_ER |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET1_RX_EN__ENET1_RX_EN |
MUX_PAD_CTRL(ENET_PAD_CTRL), -};
-static iomux_v3_cfg_t const fec2_pads[] = {
- MX6_PAD_GPIO1_IO06__ENET2_MDIO |
MUX_PAD_CTRL(MDIO_PAD_CTRL),
- MX6_PAD_GPIO1_IO07__ENET2_MDC |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 |
MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
- MX6_PAD_ENET2_TX_EN__ENET2_TX_EN |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_RX_EN__ENET2_RX_EN |
MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET2_RX_ER__ENET2_RX_ER |
MUX_PAD_CTRL(ENET_PAD_CTRL), -};
-static void setup_iomux_fec(int fec_id) -{
- if (fec_id == 0)
imx_iomux_v3_setup_multiple_pads(fec1_pads,ARRAY_SIZE(fec1_pads));- else
imx_iomux_v3_setup_multiple_pads(fec2_pads,ARRAY_SIZE(fec2_pads));-}
-int board_eth_init(bd_t *bis) -{
- setup_iomux_fec(CONFIG_FEC_ENET_DEV);
- return fecmxc_initialize_multi(bis, CONFIG_FEC_ENET_DEV,
CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);-}
static int setup_fec(int fec_id) { struct iomuxc *const iomuxc_regs = (struct iomuxc
*)IOMUXC_BASE_ADDR;
2.17.1