This parameter is needed by the PCI driver-mode interface but is always NULL on x86. There are a number of calls to this function so it makes sense to minimise the parameters.
Adjust the x86 function to omit the first parameter, and introduce stub functions to handle the conversion.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/x86/cpu/broadwell/cpu.c | 7 ++----- arch/x86/cpu/intel_common/fast_spi.c | 3 +-- arch/x86/cpu/ivybridge/cpu.c | 3 +-- arch/x86/cpu/pci.c | 20 ++++++++------------ arch/x86/include/asm/pci.h | 15 ++++++--------- drivers/pci/pci_x86.c | 16 ++++++++++++++-- 6 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/x86/cpu/broadwell/cpu.c b/arch/x86/cpu/broadwell/cpu.c index bba8cd1e942..297f1e0b682 100644 --- a/arch/x86/cpu/broadwell/cpu.c +++ b/arch/x86/cpu/broadwell/cpu.c @@ -103,11 +103,8 @@ int print_cpuinfo(void)
void board_debug_uart_init(void) { - struct udevice *bus = NULL; - /* com1 / com2 decode range */ - pci_x86_write_config(bus, PCH_DEV_LPC, LPC_IO_DEC, 1 << 4, PCI_SIZE_16); + pci_x86_write_config(PCH_DEV_LPC, LPC_IO_DEC, 1 << 4, PCI_SIZE_16);
- pci_x86_write_config(bus, PCH_DEV_LPC, LPC_EN, COMA_LPC_EN, - PCI_SIZE_16); + pci_x86_write_config(PCH_DEV_LPC, LPC_EN, COMA_LPC_EN, PCI_SIZE_16); } diff --git a/arch/x86/cpu/intel_common/fast_spi.c b/arch/x86/cpu/intel_common/fast_spi.c index a7334ecf1a3..e22d7853040 100644 --- a/arch/x86/cpu/intel_common/fast_spi.c +++ b/arch/x86/cpu/intel_common/fast_spi.c @@ -36,8 +36,7 @@ int fast_spi_get_bios_mmap(ulong *map_basep, size_t *map_sizep, uint *offsetp) ulong bar, base, mmio_base;
/* Special case to find mapping without probing the device */ - pci_x86_read_config(NULL, PCH_DEV_SPI, PCI_BASE_ADDRESS_0, &bar, - PCI_SIZE_32); + pci_x86_read_config(PCH_DEV_SPI, PCI_BASE_ADDRESS_0, &bar, PCI_SIZE_32); mmio_base = bar & PCI_BASE_ADDRESS_MEM_MASK; regs = (struct fast_spi_regs *)mmio_base; base = fast_spi_get_bios_region(regs, map_sizep); diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c index c8b16e32c03..6db9da81b71 100644 --- a/arch/x86/cpu/ivybridge/cpu.c +++ b/arch/x86/cpu/ivybridge/cpu.c @@ -199,6 +199,5 @@ int print_cpuinfo(void) void board_debug_uart_init(void) { /* This enables the debug UART */ - pci_x86_write_config(NULL, PCH_LPC_DEV, LPC_EN, COMA_LPC_EN, - PCI_SIZE_16); + pci_x86_write_config(PCH_LPC_DEV, LPC_EN, COMA_LPC_EN, PCI_SIZE_16); } diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c index 0ccde194d9a..e1aae158ce5 100644 --- a/arch/x86/cpu/pci.c +++ b/arch/x86/cpu/pci.c @@ -16,12 +16,8 @@ #include <asm/io.h> #include <asm/pci.h>
-/* - * TODO(sjg@chromium.org): Drop the first parameter from each of these - * functions since it is not used. - */ -int pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong *valuep, enum pci_size_t size) +int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep, + enum pci_size_t size) { outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR); switch (size) { @@ -39,8 +35,8 @@ int pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, return 0; }
-int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong value, enum pci_size_t size) +int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value, + enum pci_size_t size) { outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR); switch (size) { @@ -58,19 +54,19 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, return 0; }
-int pci_x86_clrset_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong clr, ulong set, enum pci_size_t size) +int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set, + enum pci_size_t size) { ulong value; int ret;
- ret = pci_x86_read_config(bus, bdf, offset, &value, size); + ret = pci_x86_read_config(bdf, offset, &value, size); if (ret) return ret; value &= ~clr; value |= set;
- return pci_x86_write_config(bus, bdf, offset, value, size); + return pci_x86_write_config(bdf, offset, value, size); }
void pci_assign_irqs(int bus, int device, u8 irq[4]) diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index fb1edf3df76..2a720735728 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -22,30 +22,28 @@ * * This function can be called before PCI is set up in driver model. * - * @bus: Bus to read from (ignored, can be NULL) * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @offset: Register offset to read * @valuep: Place to put the returned value * @size: Access size * @return 0 if OK, -ve on error */ -int pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong *valuep, enum pci_size_t size); +int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep, + enum pci_size_t size);
/** * pci_bus_write_config() - Write a configuration value to a device * * This function can be called before PCI is set up in driver model. * - * @bus: Bus to read from (ignored, can be NULL) * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @offset: Register offset to write * @value: Value to write * @size: Access size * @return 0 if OK, -ve on error */ -int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong value, enum pci_size_t size); +int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value, + enum pci_size_t size);
/** * pci_bus_clrset_config32() - Update a configuration value for a device @@ -53,15 +51,14 @@ int pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, * The register at @offset is updated to (oldvalue & ~clr) | set. This function * can be called before PCI is set up in driver model. * - * @bus: Bus to read from (ignored, can be NULL) * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @offset: Register offset to update * @clr: Bits to clear * @set: Bits to set * @return 0 if OK, -ve on error */ -int pci_x86_clrset_config(struct udevice *bus, pci_dev_t bdf, uint offset, - ulong clr, ulong set, enum pci_size_t size); +int pci_x86_clrset_config(pci_dev_t bdf, uint offset, ulong clr, ulong set, + enum pci_size_t size);
/** * Assign IRQ number to a PCI device diff --git a/drivers/pci/pci_x86.c b/drivers/pci/pci_x86.c index 520ea4649e1..e76a9c6e44f 100644 --- a/drivers/pci/pci_x86.c +++ b/drivers/pci/pci_x86.c @@ -8,9 +8,21 @@ #include <pci.h> #include <asm/pci.h>
+static int _pci_x86_read_config(struct udevice *bus, pci_dev_t bdf, uint offset, + ulong *valuep, enum pci_size_t size) +{ + return pci_x86_read_config(bdf, offset, valuep, size); +} + +static int _pci_x86_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, enum pci_size_t size) +{ + return pci_x86_write_config(bdf, offset, value, size); +} + static const struct dm_pci_ops pci_x86_ops = { - .read_config = pci_x86_read_config, - .write_config = pci_x86_write_config, + .read_config = _pci_x86_read_config, + .write_config = _pci_x86_write_config, };
static const struct udevice_id pci_x86_ids[] = {