Sets the tapdelays for eMMC HS200 mode support for ZynqMP as tapdelays needs to be programmed for it to work
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com --- board/xilinx/zynqmp/tap_delays.c | 1 + drivers/mmc/zynq_sdhci.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/xilinx/zynqmp/tap_delays.c b/board/xilinx/zynqmp/tap_delays.c index d57587e..aa0825a 100644 --- a/board/xilinx/zynqmp/tap_delays.c +++ b/board/xilinx/zynqmp/tap_delays.c @@ -235,6 +235,7 @@ void arasan_zynqmp_set_tapdelay(u8 deviceid, u8 timing, u8 bank) arasan_zynqmp_tap_sdr50(deviceid, timing, bank); break; case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: arasan_zynqmp_tap_sdr104(deviceid, timing, bank); break; case MMC_TIMING_UHS_DDR50: diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 124a908..4799e9a 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -151,7 +151,7 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host, u8 uhsmode) debug("%s, %d:%d, mode:%d\n", __func__, priv->deviceid, priv->bank, uhsmode); if ((uhsmode >= MMC_TIMING_UHS_SDR25) && - (uhsmode <= MMC_TIMING_UHS_DDR50)) + (uhsmode <= MMC_TIMING_HS200)) arasan_zynqmp_set_tapdelay(priv->deviceid, uhsmode, priv->bank); }