On 01/10/2017 06:20 AM, Chee Tien Fong wrote:
From: Tien Fong Chee tien.fong.chee@intel.com
Add config for the Arria10 SoC Development Kit.
Signed-off-by: Dinh Nguyen dinguyen@opensource.altera.com Signed-off-by: Tien Fong Chee tien.fong.chee@intel.com Acked-by: Marek Vasut marex@denx.de Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@kernel.org Cc: Chin Liang See chin.liang.see@intel.com Cc: Tien Fong skywindctf@gmail.com
include/configs/socfpga_arria10_socdk.h | 94 +++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 include/configs/socfpga_arria10_socdk.h
diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h new file mode 100644 index 0000000..577f60f --- /dev/null +++ b/include/configs/socfpga_arria10_socdk.h @@ -0,0 +1,94 @@ +/*
- Copyright (C) 2015 Altera Corporation <www.altera.com>
2017 ... fix globally.
- SPDX-License-Identifier: GPL-2.0
- */
+#ifndef __CONFIG_SOCFGPA_ARRIA10_H__ +#define __CONFIG_SOCFGPA_ARRIA10_H__
+#include <asm/arch/base_addr_a10.h> +/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_HW_WATCHDOG
+#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING
A lot of this stuff was converted to Kconfig, please recheck.
+/*
- Memory configurations
- */
+#define PHYS_SDRAM_1_SIZE 0x2000000
+/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "zImage" +#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" +#define CONFIG_LOADADDR 0x01000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+/*
- Display CPU and Board Info
- */
+#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DISPLAY_BOARDINFO_LATE
+/* Ethernet on SoC (EMAC) */ +#if defined(CONFIG_CMD_NET)
+/* PHY */ +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9031
+#endif
+#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0/* device 0 */ +#define CONFIG_ENV_OFFSET 512/* just after the MBR */
+/*
- arguments passed to the bootz command. The value of
- CONFIG_BOOTARGS goes into the environment value "bootargs".
- Do note the value will overide also the chosen node in FDT blob.
- */
+#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
+#define CONFIG_EXTRA_ENV_SETTINGS \
- "verify=n\0" \
- "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
"bootm ${loadaddr} - ${fdt_addr}\0" \- "bootimage=zImage\0" \
- "fdt_addr=100\0" \
- "fdtimage=socfpga.dtb\0" \
"fsloadcmd=ext2load\0" \- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
" root=${mmcroot} rw rootwait;" \"bootz ${loadaddr} - ${fdt_addr}\0" \- "mmcload=mmc rescan;" \
"load mmc 0:1 ${loadaddr} ${bootimage};" \"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \- "qspiroot=/dev/mtdblock0\0" \
- "qspirootfstype=jffs2\0" \
- "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
" root=${qspiroot} rw rootfstype=${qspirootfstype};"\"bootm ${loadaddr} - ${fdt_addr}\0"
Take a look at: [PATCH v2 0/7] arm: socfpga: update socfpga environments and adjust accordingly.
+/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> +#endif /* __CONFIG_H */