Re: [U-Boot] [PATCH 2/4] ventana: use non-generic pfuze100 init

On 23/04/2014 06:53, Tim Harvey wrote:

Signed-off-by: Tim Harvey tharvey@gateworks.com

board/gateworks/gw_ventana/gw_ventana.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index c130e2c..48e90e0 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1077,10 +1077,11 @@ int misc_init_r(void) }

/* configure PFUZE100 PMIC (not used on all Ventana baseboards) */

• if ((board_type == GW54xx || board_type == GW54proto) &&

•    !pmic_init(I2C_PMIC)) {
  

• power_pfuze100_init(I2C_PMIC);
• if (board_type == GW54xx || board_type == GW54proto) { struct pmic *p = pmic_get("PFUZE100_PMIC"); u32 reg;
• if (p && !pmic_probe(p)) { pmic_reg_read(p, PFUZE100_DEVICEID, &reg); printf("PMIC: PFUZE100 ID=0x%02x\n", reg);

Applied to u-boot-imx, thanks !

Best regards, Stefano Babic