After the initial configuration some USB keyboard+mouse devices never return any kind of event on the interrupt line. In particular, the device identified by "Cypress Cypress USB Keyboard / PS2 Mouse as 3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:04B4:0101.0001/input/input0" never returns a data packet until the first external input event.
I found this was also true with some newer model Dell keyboards.
When the device is plugged into a xhci controller there is also no point in waiting 5 seconds for a device that is never going to present data, so the call to the interrupt service was changed to a nonblocking operation for the controllers that support this.
With the patch applied, the rpi3 and rpi4 work well with the more complex keyboard devices.
Signed-off-by: Jason Wessel jason.wessel@windriver.com --- common/usb_kbd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/common/usb_kbd.c b/common/usb_kbd.c index b316807844..3c0056e1b9 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -519,7 +519,9 @@ static int usb_kbd_probe_dev(struct usb_device *dev, unsigned int ifnum) 1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE) < 0) { #else if (usb_int_msg(dev, data->intpipe, data->new, data->intpktsize, - data->intinterval, false) < 0) { + data->intinterval, true) < 0) { + /* Read first packet if the device provides it, else pick it up later */ + return 1; #endif printf("Failed to get keyboard state from device %04x:%04x\n", dev->descriptor.idVendor, dev->descriptor.idProduct);