From: Ronald Wahl ronald.wahl@legrand.com
The get_timer function returns an unsigned long which may be calculated from the ARM system counter. This counter is reset only on a cold reset. U-boot divides this counter down to a 1000 Hz counter that will cross the 32bit barrier after a bit more than 49 days. Assigning the value to an unsigned int will truncate it on 64bit systems. Passing this truncated value back to the get_timer function will return a very large value that is certainly larger than the timeout and so will go down the error path and besides stopping U-Boot will lead to messages like
"SPI: QSPI is still busy after poll for 5000 ms."
Signed-off-by: Ronald Wahl ronald.wahl@legrand.com Cc: Vignesh R vigneshr@ti.com Cc: Pratyush Yadav p.yadav@ti.com --- drivers/spi/cadence_qspi_apb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index 93ab2b5635..f2f69cf9f1 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -151,9 +151,9 @@ static int cadence_qspi_set_protocol(struct cadence_spi_priv *priv, /* Return 1 if idle, otherwise return 0 (busy). */ static unsigned int cadence_qspi_wait_idle(void *reg_base) { - unsigned int start, count = 0; + unsigned long start, count = 0; /* timeout in unit of ms */ - unsigned int timeout = 5000; + unsigned long timeout = 5000;
start = get_timer(0); for ( ; get_timer(start) < timeout ; ) { @@ -170,7 +170,7 @@ static unsigned int cadence_qspi_wait_idle(void *reg_base) }
/* Timeout, still in busy mode. */ - printf("QSPI: QSPI is still busy after poll for %d ms.\n", timeout); + printf("QSPI: QSPI is still busy after poll for %lu ms.\n", timeout); return 0; }
-- 2.47.1