From: Igor Opaniuk igor.opaniuk@toradex.com
For Colibri iMX6ULL we have to set pinmux configuration ASAP (ideally before relocation) to get serial console working. Without this we miss almost the half of output (U-boot version, CPU defails, Reset cause, DRAM details etc.).
To achieve this we need to force pinctrl-mx6 to get probed before relocation. Setting pinmux configuration for UART before was done in board_early_init_f().
Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm") Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com ---
drivers/pinctrl/nxp/pinctrl-imx6.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c index 0c1e7a9c05..aafa3057ad 100644 --- a/drivers/pinctrl/nxp/pinctrl-imx6.c +++ b/drivers/pinctrl/nxp/pinctrl-imx6.c @@ -49,7 +49,5 @@ U_BOOT_DRIVER(imx6_pinctrl) = { .remove = imx_pinctrl_remove, .priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv), .ops = &imx_pinctrl_ops, -#if !CONFIG_IS_ENABLED(OF_CONTROL) .flags = DM_FLAG_PRE_RELOC, -#endif };