Add support for packaging the TIFS Stub as it's required for basic Low Power Modes like Deep Sleep. The reason it is packaged using binman and not inherently as part of the DM firmware is because for HS devices, customer owns the customer key and only customer has access to it. DM is release by TI, Since TI doesn't have access to the customer key it cannot have a component that is signed by customer key. Hence, it's left as part of binman to be signed and packaged.
Reviewed-by: Nishanth Menon nm@ti.com Acked-by: Neha Malcom Francis n-francis@ti.com Signed-off-by: Dhruva Gole d-gole@ti.com --- arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 33 +++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi index 467cac68d0f6..a067b0ba3543 100644 --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi @@ -78,6 +78,23 @@ }; };
+ tifsstub-gp { + filename = "tifsstub.bin_gp"; + ti-secure-rom { + content = <&tifsstub_gp>; + core = "secure"; + load = <0x60000>; + sw-rev = <CONFIG_K3_X509_SWRV>; + keyfile = "ti-degenerate-key.pem"; + tifsstub; + }; + tifsstub_gp: tifsstub-gp.bin { + filename = "ti-sysfw/ti-fs-stub-firmware-am62x-gp.bin"; + type = "blob-ext"; + optional; + }; + }; + ti-spl_unsigned { filename = "tispl.bin_unsigned"; symlink = "tispl.bin"; @@ -115,6 +132,19 @@ }; };
+ tifsstub-gp { + description = "tifsstub"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-gp"; + load = <0x9dc00000>; + entry = <0x9dc00000>; + blob-ext { + filename = "tifsstub.bin_gp"; + }; + }; + dm { description = "DM binary"; type = "firmware"; @@ -158,7 +188,8 @@ conf-0 { description = "k3-am625-beagleplay"; firmware = "atf"; - loadables = "tee", "dm", "spl"; + loadables = "tee", "dm", "spl", + "tifsstub-gp"; fdt = "fdt-0"; }; };