Build in the driver for the Aspeed GPIO controller and turn on the `gpio` shell command.
Signed-off-by: Andrew Jeffery andrew@aj.id.au --- configs/evb-ast2500_defconfig | 3 +++ configs/evb-ast2600_defconfig | 3 +++ 2 files changed, 6 insertions(+)
diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig index ea001851cac1..26743fc8f5a6 100644 --- a/configs/evb-ast2500_defconfig +++ b/configs/evb-ast2500_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_EVB_AST2500=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x20000 +CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ast2500-evb" CONFIG_PRE_CON_BUF_ADDR=0x1e720000 CONFIG_SYS_LOAD_ADDR=0x83000000 @@ -18,6 +19,7 @@ CONFIG_PRE_CONSOLE_BUFFER=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y @@ -28,6 +30,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_REGMAP=y CONFIG_CLK=y +CONFIG_ASPEED_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_ASPEED=y CONFIG_MMC_SDHCI=y diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig index 172b08e63ccb..1c58f34079e3 100644 --- a/configs/evb-ast2600_defconfig +++ b/configs/evb-ast2600_defconfig @@ -11,6 +11,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x10000 +CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb" CONFIG_SPL_SERIAL=y CONFIG_SPL_STACK_R_ADDR=0x83000000 @@ -39,6 +40,7 @@ CONFIG_SPL_DM_RESET=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y @@ -57,6 +59,7 @@ CONFIG_SPL_CLK=y CONFIG_DM_HASH=y CONFIG_HASH_ASPEED=y CONFIG_ASPEED_ACRY=y +CONFIG_ASPEED_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_SPL_MISC=y