This board has not been converted to generic board by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/cpu/armv7/omap3/Kconfig | 4 - board/logicpd/omap3som/Kconfig | 12 -- board/logicpd/omap3som/MAINTAINERS | 6 - board/logicpd/omap3som/Makefile | 8 - board/logicpd/omap3som/omap3logic.c | 242 --------------------------- board/logicpd/omap3som/omap3logic.h | 31 ---- configs/omap3_logic_defconfig | 8 - include/configs/omap3_logic.h | 322 ------------------------------------ 8 files changed, 633 deletions(-) delete mode 100644 board/logicpd/omap3som/Kconfig delete mode 100644 board/logicpd/omap3som/MAINTAINERS delete mode 100644 board/logicpd/omap3som/Makefile delete mode 100644 board/logicpd/omap3som/omap3logic.c delete mode 100644 board/logicpd/omap3som/omap3logic.h delete mode 100644 configs/omap3_logic_defconfig delete mode 100644 include/configs/omap3_logic.h
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index 336da53..9665c95 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -87,9 +87,6 @@ config TARGET_MCX bool "MCX" select SUPPORT_SPL
-config TARGET_OMAP3_LOGIC - bool "OMAP3 Logic" - config TARGET_OMAP3_MVBLX bool "OMAP3 MVBLX"
@@ -139,7 +136,6 @@ source "board/pandora/Kconfig" source "board/8dtech/eco5pk/Kconfig" source "board/corscience/tricorder/Kconfig" source "board/htkw/mcx/Kconfig" -source "board/logicpd/omap3som/Kconfig" source "board/matrix_vision/mvblx/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" diff --git a/board/logicpd/omap3som/Kconfig b/board/logicpd/omap3som/Kconfig deleted file mode 100644 index 03d272a..0000000 --- a/board/logicpd/omap3som/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP3_LOGIC - -config SYS_BOARD - default "omap3som" - -config SYS_VENDOR - default "logicpd" - -config SYS_CONFIG_NAME - default "omap3_logic" - -endif diff --git a/board/logicpd/omap3som/MAINTAINERS b/board/logicpd/omap3som/MAINTAINERS deleted file mode 100644 index ffe2201..0000000 --- a/board/logicpd/omap3som/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -OMAP3SOM BOARD -M: Peter Barada peter.barada@logicpd.com -S: Maintained -F: board/logicpd/omap3som/ -F: include/configs/omap3_logic.h -F: configs/omap3_logic_defconfig diff --git a/board/logicpd/omap3som/Makefile b/board/logicpd/omap3som/Makefile deleted file mode 100644 index 87b86ad..0000000 --- a/board/logicpd/omap3som/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := omap3logic.o diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c deleted file mode 100644 index 609edf1..0000000 --- a/board/logicpd/omap3som/omap3logic.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * (C) Copyright 2011 - * Logic Product Development <www.logicpd.com> - * - * Author : - * Peter Barada peter.barada@logicpd.com - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff r-woodruff2@ti.com - * Syed Mohammed Khasim khasim@ti.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <netdev.h> -#include <flash.h> -#include <nand.h> -#include <i2c.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/mem.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> -#include <asm/mach-types.h> -#include "omap3logic.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * two dimensional array of strucures containining board name and Linux - * machine IDs; row it selected based on CPU column is slected based - * on hsusb0_data5 pin having a pulldown resistor - */ -static struct board_id { - char *name; - int machine_id; -} boards[2][2] = { - { - { - .name = "OMAP35xx SOM LV", - .machine_id = MACH_TYPE_OMAP3530_LV_SOM, - }, - { - .name = "OMAP35xx Torpedo", - .machine_id = MACH_TYPE_OMAP3_TORPEDO, - }, - }, - { - { - .name = "DM37xx SOM LV", - .machine_id = MACH_TYPE_DM3730_SOM_LV, - }, - { - .name = "DM37xx Torpedo", - .machine_id = MACH_TYPE_DM3730_TORPEDO, - }, - }, -}; - -/* - * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV - */ -#define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */ - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - struct board_id *board; - unsigned int val; - - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - /* - * To identify between a SOM LV and Torpedo module, - * a pulldown resistor is on hsusb0_data5 for the SOM LV module. - * Drive the pin (and let it soak), then read it back. - * If the pin is still high its a Torpedo. If low its a SOM LV - */ - - /* Mux hsusb0_data5 as a GPIO */ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4)); - - if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) { - - /* - * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV - * will drain the voltage. - */ - gpio_direction_output(BOARD_ID_GPIO, 0); - gpio_set_value(BOARD_ID_GPIO, 1); - - /* Let it soak for a bit */ - sdelay(0x100); - - /* - * Read state of BOARD_ID_GPIO as an input and if its set. - * If so the board is a Torpedo - */ - gpio_direction_input(BOARD_ID_GPIO); - val = gpio_get_value(BOARD_ID_GPIO); - gpio_free(BOARD_ID_GPIO); - - board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val]; - printf("Board: %s\n", board->name); - - /* Set the machine_id passed to Linux */ - gd->bd->bi_arch_number = board->machine_id; - } - - /* restore hsusb0_data5 pin as hsusb0_data5 */ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)); - - return 0; -} - -#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} -#endif - -#if defined(CONFIG_GENERIC_MMC) -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif - -#ifdef CONFIG_SMC911X -/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */ -static const u32 gpmc_lan92xx_config[] = { - NET_LAN92XX_GPMC_CONFIG1, - NET_LAN92XX_GPMC_CONFIG2, - NET_LAN92XX_GPMC_CONFIG3, - NET_LAN92XX_GPMC_CONFIG4, - NET_LAN92XX_GPMC_CONFIG5, - NET_LAN92XX_GPMC_CONFIG6, -}; - -int board_eth_init(bd_t *bis) -{ - enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1], - CONFIG_SMC911X_BASE, GPMC_SIZE_16M); - - return smc911x_initialize(0, CONFIG_SMC911X_BASE); -} -#endif - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - /*GPMC*/ - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M0)); - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M4)); - MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | DIS | M1)); /*GPMC_IO_DIR*/ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)); - - /*Expansion card */ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); - - /* Serial Console */ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)); - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)); - MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)); - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)); - - /* I2C */ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)); - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)); - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); - - MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)); - - /*Control and debug */ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)); - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)); - MUX_VAL(CP(JTAG_NTRST), (IEN | PTD | DIS | M0)); - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); -} diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h deleted file mode 100644 index 3a3ef6e..0000000 --- a/board/logicpd/omap3som/omap3logic.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * (C) Copyright 2011 - * Logic Product Development <www.logicpd.com> - * - * Author: - * Peter Barada peter.barada@logicpd.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _OMAP3LOGIC_H_ -#define _OMAP3LOGIC_H_ - -/* - * OMAP3 GPMC register settings for CS1 LAN922x - */ -#define NET_LAN92XX_GPMC_CONFIG1 0x00001000 -#define NET_LAN92XX_GPMC_CONFIG2 0x00080801 -#define NET_LAN92XX_GPMC_CONFIG3 0x00000000 -#define NET_LAN92XX_GPMC_CONFIG4 0x08010801 -#define NET_LAN92XX_GPMC_CONFIG5 0x00080a0a -#define NET_LAN92XX_GPMC_CONFIG6 0x03000280 - - -const omap3_sysinfo sysinfo = { - DDR_DISCRETE, - "Logic DM37x/OMAP35x reference board", - "NAND", -}; - - -#endif diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig deleted file mode 100644 index 5d0ac9e..0000000 --- a/configs/omap3_logic_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP34XX=y -CONFIG_TARGET_OMAP3_LOGIC=y -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -CONFIG_SYS_PROMPT="OMAP Logic # " diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h deleted file mode 100644 index e09e617..0000000 --- a/include/configs/omap3_logic.h +++ /dev/null @@ -1,322 +0,0 @@ -/* - * (C) Copyright 2011 Logic Product Development <www.logicpd.com> - * Peter Barada peter.barada@logicpd.com - * - * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo - * reference boards. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766 - -#define CONFIG_SYS_TEXT_BASE 0x80400000 - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* - * Display CPU and Board information - */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */ - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -#define CONFIG_CMDLINE_EDITING /* cmd line edit/history */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */ - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ -#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(x-loader),"\ - "1920k(u-boot),128k(u-boot-env),"\ - "4m(kernel),-(fs)" - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_SYS_NO_FLASH - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_NAND_QUIET_TEST -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand at */ - /* CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ - /* NAND devices */ -#define CONFIG_SYS_NAND_BUSWIDTH_16BIT -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - -/* Environment information */ -#define CONFIG_BOOTDELAY 2 - -/* - * PREBOOT assumes the 4.3" display is attached. User can interrupt - * and modify display variable to suit their needs. - */ -#define CONFIG_PREBOOT \ - "echo ======================NOTICE============================;"\ - "echo "The u-boot environment is not set.";" \ - "echo "If using a display a valid display varible for your panel";" \ - "echo "needs to be set.";" \ - "echo "Valid display options are:";" \ - "echo " 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp";" \ - "echo " 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC";" \ - "echo " 5 == LQ064D343 TFT VGA (6.4) Sharp";" \ - "echo " 7 == LQ10D368 TFT VGA (10.4) Sharp";" \ - "echo " 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)";" \ - "echo " vga[-dvi or -hdmi] LCD VGA 640x480";" \ - "echo " svga[-dvi or -hdmi] LCD SVGA 800x600";" \ - "echo " xga[-dvi or -hdmi] LCD XGA 1024x768";" \ - "echo " 720p[-dvi or -hdmi] LCD 720P 1280x720";" \ - "echo "Defaulting to 4.3 LCD panel (display=15).";" \ - "setenv display 15;" \ - "setenv preboot;" \ - "saveenv;" - - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x81000000\0" \ - "bootfile=uImage\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "mmcdev=0\0" \ - "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "run defaultboot;" \ - "fi; " \ - "else run defaultboot; fi\0" \ - "defaultboot=run mmcramboot\0" \ - "consoledevice=ttyO0\0" \ - "display=15\0" \ - "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \ - "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \ - "rotation=0\0" \ - "vrfb_arg=if itest ${rotation} -ne 0; then " \ - "setenv bootargs ${bootargs} omapfb.vrfb=y " \ - "omapfb.rotate=${rotation}; " \ - "fi\0" \ - "otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \ - "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "common_bootargs=setenv bootargs ${bootargs} display=${display} " \ - "${otherbootargs};" \ - "run addmtdparts; " \ - "run vrfb_arg\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo 'Running bootscript from mmc ...'; " \ - "source ${loadaddr}\0" \ - "loaduimage=mmc rescan ${mmcdev}; " \ - "fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ - "ramdisksize=64000\0" \ - "ramdiskaddr=0x82000000\0" \ - "ramdiskimage=rootfs.ext2.gz.uboot\0" \ - "ramargs=run setconsole; setenv bootargs console=${console} " \ - "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \ - "mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \ - "run ramargs; " \ - "run common_bootargs; " \ - "run dump_bootargs; " \ - "run loaduimage; " \ - "fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\ - "bootm ${loadaddr} ${ramdiskaddr}\0" \ - "ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \ - "run ramargs; " \ - "run common_bootargs; " \ - "run dump_bootargs; " \ - "tftpboot ${loadaddr} ${bootfile}; "\ - "tftpboot ${ramdiskaddr} ${ramdiskimage}; "\ - "bootm ${loadaddr} ${ramdiskaddr}\0" - -#define CONFIG_BOOTCOMMAND \ - "run autoboot" - -#define CONFIG_AUTO_COMPLETE -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ - /* address */ - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE ONENAND_MAP -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#endif - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * SMSC922x Ethernet - */ -#if defined(CONFIG_CMD_NET) - -#define CONFIG_SMC911X -#define CONFIG_SMC911X_16_BIT -#define CONFIG_SMC911X_BASE 0x08000000 - -#endif /* (CONFIG_CMD_NET) */ - -/* - * BOOTP fields - */ - -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 - -#endif /* __CONFIG_H */