On 28.2.2018 10:30, Vipul Kumar wrote:
This patch enabled eeprom related u-boot headers in the respective defconfig and removed CONFIG_ZYNQ_EEPROM.
Signed-off-by: Vipul Kumar vipulk@xilinx.com Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com
- Changes in v2:
- Removed CONFIG_ZYNQ_EEPROM for zynqmp.
- Enabled configs defined under CONFIG_ZYNQ_EEPROM for zynq in defconfig and removed CONFIG_ZYNQ_EEPROM.
- Branch: u-boot-microblaze/kconfig
configs/zynq_zc702_defconfig | 6 ++++++ configs/zynq_zc706_defconfig | 6 ++++++ include/configs/xilinx_zynqmp_ep.h | 1 - include/configs/zynq-common.h | 9 --------- include/configs/zynq_zc70x.h | 2 -- 5 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 8e8b800..2970ef8 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -43,6 +43,12 @@ CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_SYS_I2C_ZYNQ=y CONFIG_ZYNQ_I2C0=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x54 +CONFIG_SYS_EEPROM_SIZE=1024 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 8f83d17..b51567c 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -43,6 +43,12 @@ CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_SYS_I2C_ZYNQ=y CONFIG_ZYNQ_I2C0=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x54 +CONFIG_SYS_EEPROM_SIZE=1024 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH=y diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index 3a572b7..6c48e15 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -15,7 +15,6 @@
#define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 #define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9) -#define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR}
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 0ebb66b..4622d39 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -122,15 +122,6 @@ # define CONFIG_SYS_I2C #endif
-/* EEPROM */ -#ifdef CONFIG_ZYNQ_EEPROM -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */ -#endif
/* Total Size of Environment Sector */ #define CONFIG_ENV_SIZE (128 << 10)
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 720f953..715ea80 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -10,8 +10,6 @@ #ifndef __CONFIG_ZYNQ_ZC70X_H #define __CONFIG_ZYNQ_ZC70X_H
-#define CONFIG_ZYNQ_EEPROM
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_ZC70X_H */
Please take a look at this again. I can compile it on zc706. This will require to switch to DM based driver which is not done here too. It means this patch is not complete.
Thanks, Michal