On Tue, 2013-01-29 at 17:58 +0800, Bo Shen wrote:
You should use at91sam9g20ek_2mmc_nandflash to configure the u-boot
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 2555672..ce475df 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -157,6 +157,10 @@ int board_early_init_f(void)
int board_init(void) { +#ifdef CONFIG_AT91SAM9G20EK_2MMC
/* arch number of AT91SAM9260EK-Board */gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC;+#else #ifdef CONFIG_AT91SAM9G20EK /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; @@ -164,6 +168,7 @@ int board_init(void) /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; #endif +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/boards.cfg b/boards.cfg index e4b0d44..fa863dc 100644 --- a/boards.cfg +++ b/boards.cfg @@ -95,6 +95,7 @@ at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH +at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
That worked! Very nice! But, I had to apply the patches manually. Email may have messed up the patch sets with new-lines and indentation. Can this be added to the main stream? I am on to learning 'env import'. Thank you.
If email messed it up once, I guess it could mess it up again, but I generated patches using: diff -Naur before/ after/ > diff.patch
--- board/atmel/at91sam9260ek/at91sam9260ek.c.orig 2013-01-29 09:09:35.000000000 -0800 +++ board/atmel/at91sam9260ek/at91sam9260ek.c 2013-01-29 09:10:46.000000000 -0800 @@ -157,6 +157,10 @@
int board_init(void) { +#ifdef CONFIG_AT91SAM9G20EK_2MMC + /* arch number of AT91SAM9260EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC; +#else #ifdef CONFIG_AT91SAM9G20EK /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; @@ -164,6 +168,7 @@ /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; #endif +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
--- boards.cfg.orig 2013-01-29 08:56:47.000000000 -0800 +++ boards.cfg 2013-01-29 08:58:21.000000000 -0800 @@ -94,6 +94,7 @@ at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 +at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH