On Mon, Feb 13, 2017 at 3:17 PM, Tom Rini trini@konsulko.com wrote:
On Mon, Feb 13, 2017 at 03:14:28PM +0100, Axel Haslam wrote:
Hi Tom
On Mon, Feb 13, 2017 at 2:23 PM, Tom Rini trini@konsulko.com wrote:
On Mon, Feb 13, 2017 at 11:44:57AM +0100, Axel Haslam wrote:
The uboot binary on the AIS file starts at offset 0x8000. This would be sector 0x40 on a mmc card with 512 bytes per sector: 0x8000/0x200 = 0x40.
But because we usually skip the first mmc sector to preserve the partition table, the ais image is written starting on sector 0x1, and the u-boot binary ends up at sector 0x41.
Set the address of the u-boot binary to 0x41 so that spl can correctly jump to it.
Signed-off-by: Axel Haslam ahaslam@baylibre.com
configs/omapl138_lcdk_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index d20af19..a249ebd 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -12,7 +12,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x41
Since we're changing a default here, and one that will lead to non-booting boards if you don't notice, where did the old value come from, and is it actually in use anywhere? Thanks!
I think the "old offset" would be correct when you copy the AIS image to the sd card using the uflash tool from TI. This tool adds some extra space at the start of the mmc for UBL configuration settings, which does not seem to be needed for the lcdk. The generated AIS image with SPL can boot the board directly and we can just copy the resulting AIS to the sdcard with the "dd" command.
Ah yes, that tool. What is the drive for not being compatible with that tool in terms of offset? With binman it should be easy enough to have U-Boot generate a binary with sufficient padding between items. Thanks!
Good point. i will try that instead. Thanks for the tip.
Axel.
-- Tom