This patch adds support for the Keymile SUEN3 board which is based on the Marvell Kirkwood (88F6281) SoC.
Signed-off-by: Stefan Roese sr@denx.de Cc: Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com --- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 3 + board/keymile/suen3/Makefile | 51 +++++++++ board/keymile/suen3/config.mk | 25 ++++ board/keymile/suen3/sdramregs.txt | 28 +++++ board/keymile/suen3/suen3.c | 127 +++++++++++++++++++++ include/configs/suen3.h | 221 +++++++++++++++++++++++++++++++++++++ 8 files changed, 457 insertions(+), 0 deletions(-) create mode 100644 board/keymile/suen3/Makefile create mode 100644 board/keymile/suen3/config.mk create mode 100644 board/keymile/suen3/sdramregs.txt create mode 100644 board/keymile/suen3/suen3.c create mode 100644 include/configs/suen3.h
diff --git a/MAINTAINERS b/MAINTAINERS index 705bac5..ce117e1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -637,6 +637,7 @@ Stefan Roese sr@denx.de ixdpg425 xscale pdnb3 xscale scpu xscale + suen3 ARM926EJS (Kirkwood SoC)
Alessandro Rubini rubini@unipv.it Nomadik Linux Team STN_WMM_nomadik_linux@list.st.com diff --git a/MAKEALL b/MAKEALL index 41f1445..6c80694 100755 --- a/MAKEALL +++ b/MAKEALL @@ -524,6 +524,7 @@ LIST_ARM9=" \ scb9328 \ smdk2400 \ smdk2410 \ + suen3 \ trab \ VCMA9 \ versatile \ diff --git a/Makefile b/Makefile index 2a06440..3afc4ba 100644 --- a/Makefile +++ b/Makefile @@ -2925,6 +2925,9 @@ smdk2400_config : unconfig smdk2410_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
+suen3_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) keymile kirkwood + SX1_stdout_serial_config \ SX1_config: unconfig @mkdir -p $(obj)include diff --git a/board/keymile/suen3/Makefile b/board/keymile/suen3/Makefile new file mode 100644 index 0000000..de05cc8 --- /dev/null +++ b/board/keymile/suen3/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Prafulla Wadaskar prafulla@marvell.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := suen3.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/keymile/suen3/config.mk b/board/keymile/suen3/config.mk new file mode 100644 index 0000000..fb29a1b --- /dev/null +++ b/board/keymile/suen3/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Prafulla Wadaskar prafulla@marvell.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +TEXT_BASE = 0x00600000 diff --git a/board/keymile/suen3/sdramregs.txt b/board/keymile/suen3/sdramregs.txt new file mode 100644 index 0000000..74abb20 --- /dev/null +++ b/board/keymile/suen3/sdramregs.txt @@ -0,0 +1,28 @@ +0xFFD10000 0x01111111 +0xFFD10008 0x00001100 +0xFFD100E0 0x1B1B1B1B +0xFFD20134 0xBBBBBBBB +0xFFD20138 0x00BBBBBB +0xFFD20154 0x00000200 +0xFFD2014C 0x00001C00 +0xFFD20148 0x00000001 +0xFFD01400 0x43000400 +0xFFD01404 0x36343000 +0xFFD01408 0x2302544B +0xFFD0140C 0x00000032 +0xFFD01410 0x0000000D +0xFFD01414 0x00000000 +0xFFD01418 0x00000000 +0xFFD0141C 0x00000642 +0xFFD01420 0x00000040 +0xFFD01424 0x0000F07F +0xFFD01504 0x07FFFFF1 +0xFFD01508 0x00000000 +0xFFD0150C 0x00000000 +0xFFD01514 0x00000000 +0xFFD0151C 0x00000000 +0xFFD01494 0x00000000 +0xFFD01498 0x00000000 +0xFFD0149C 0x0000E90F +0xFFD01480 0x00000001 +0x0 0x0 diff --git a/board/keymile/suen3/suen3.c b/board/keymile/suen3/suen3.c new file mode 100644 index 0000000..231745f --- /dev/null +++ b/board/keymile/suen3/suen3.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar prafulla@marvell.com + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <netdev.h> +#include <miiphy.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* Multi-Purpose Pins Functionality configuration */ + u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_PEX_RST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Reserved */ + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_GPIO, /* Not used */ + MPP16_GPIO, /* Not used */ + MPP17_GPIO, /* Reserved */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, + MPP21_GPIO, + MPP22_GPIO, + MPP23_GPIO, + MPP24_GPIO, + MPP25_GPIO, + MPP26_GPIO, + MPP27_GPIO, + MPP28_GPIO, + MPP29_GPIO, + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPIO, + MPP34_GPIO, /* CDL1 (input) */ + MPP35_GPIO, /* CDL2 (input) */ + MPP36_GPIO, /* MAIN_IRQ (input) */ + MPP37_GPIO, /* BOARD_LED */ + MPP38_GPIO, /* Piggy3 LED[1] */ + MPP39_GPIO, /* Piggy3 LED[2] */ + MPP40_GPIO, /* Piggy3 LED[3] */ + MPP41_GPIO, /* Piggy3 LED[4] */ + MPP42_GPIO, /* Piggy3 LED[5] */ + MPP43_GPIO, /* Piggy3 LED[6] */ + MPP44_GPIO, /* Piggy3 LED[7] */ + MPP45_GPIO, /* Piggy3 LED[8] */ + MPP46_GPIO, /* Reserved */ + MPP47_GPIO, /* Reserved */ + MPP48_GPIO, /* Reserved */ + MPP49_GPIO, /* SW_INTOUTn */ + 0 + }; + + kirkwood_mpp_conf(kwmpp_config); + + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_SUEN3; + + /* address of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +int dram_init(void) +{ + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + gd->bd->bi_dram[i].start = kw_sdram_bar(i); + gd->bd->bi_dram[i].size = kw_sdram_bs(i); + } + return 0; +} + +/* Configure and enable MV88E1118 PHY */ +void reset_phy(void) +{ + char *name = "egiga0"; + + if (miiphy_set_current_dev(name)) + return; + + /* reset the phy */ + miiphy_reset(name, CONFIG_PHY_BASE_ADR); +} diff --git a/include/configs/suen3.h b/include/configs/suen3.h new file mode 100644 index 0000000..1b971e0 --- /dev/null +++ b/include/configs/suen3.h @@ -0,0 +1,221 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar prafulla@marvell.com + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_SUEN3_H +#define _CONFIG_SUEN3_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nKeymile SUEN3" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL +#define CONFIG_ARM926EJS /* Basic Architecture */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SOC Family Name */ +#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_MACH_SUEN3 /* Machine type */ + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ + +#define CONFIG_SYS_64BIT_VSPRINTF + +/* + * CLKs configurations + */ +#define CONFIG_SYS_HZ 1000 + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /* Console on UART0 */ +#define CONFIG_BAUDRATE 115200 /* console baudrate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200,230400, 460800, 921600 } +/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +/* + * Commands configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MII +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_UBI + +/* + * Without NOR FLASH we need this + */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + +/* + * NAND Flash configuration + */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_NAND_KIRKWOOD +#define CONFIG_SYS_NAND_BASE 0xd8000000 + +/* + * Environment variables configurations + */ +#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */ +#define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */ +#define CONFIG_ENV_OFFSET (512 << 10) /* Offset to env */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) + +/* + * Default environment variables + */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "load=tftp 400000 suen3/u-boot.bin\0" \ + "update=nand erase 0 60000;nand write 400000 0 60000\0" \ + "upd=run load update\0" \ + "mtdparts=orion_nand:512k(uboot),512k@512k(env)," \ + "2m@1m(kernel),13m@3m(rootfs)\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttyS0,${baudrate}\0" \ + "addmisc=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "rootpath=/opt/eldk/arm\0" \ + "kernel_addr=400000\0" \ + "ramdisk_addr_r=C00000\0" \ + "hostname=suen3\0" \ + "bootfile=suen3/uImage\0" \ + "ramdisk_file=suen3/uRamdisk\0" \ + "net_nfs=tftp ${kernel_addr} ${bootfile};" \ + "run nfsargs addip addtty addmisc;" \ + "bootm ${kernel_addr}\0" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4M */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required minimal configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* + * Ethernet Driver configuration + */ +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */ + +/* + * UBI related stuff + */ +#define CONFIG_SYS_USE_UBI +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=orion_nand" +#define MTDPARTS_DEFAULT "mtdparts=orion_nand:512k(u-boot)," \ + "256k(env)," \ + "2m(kernel)," \ + "16m(rootfs)," \ + "32m(fs)," \ + "-(ubifs)" + +#endif /* _CONFIG_SUEN3_H */