Re: [PATCH 5/7] hmibsc: Enable RAUC support

Hi Sumit,

Please add a description to this patch (what is RAUC?).

On 18/12/2023 07:24, Sumit Garg wrote:

Signed-off-by: Sumit Garg sumit.garg@linaro.org

include/configs/hmibsc.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)

diff --git a/include/configs/hmibsc.h b/include/configs/hmibsc.h index 04052ed6dee..b614dec7870 100644 --- a/include/configs/hmibsc.h +++ b/include/configs/hmibsc.h @@ -16,4 +16,42 @@ #define PHYS_SDRAM_1_SIZE SZ_1G #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1

+#undef CONFIG_BOOTCOMMAND +# define CONFIG_BOOTCOMMAND \

• "setenv devtype mmc; setenv devnum 0; " \
• "test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"; " \
• "test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3; " \
• "test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3; " \
• "setenv raucslot; " \
• "for BOOT_SLOT in "${BOOT_ORDER}"; do " \
• " if test "x${raucslot}" != "x"; then " \
• " echo "skip remaining slots..."; " \
• " elif test "x${BOOT_SLOT}" = "xA"; then " \
• " if test ${BOOT_A_LEFT} -gt 0; then " \
• " setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1; " \
• " echo "Found valid RAUC slot A"; " \
• " setenv raucslot "rauc.slot=A"; " \
• " setenv raucpart A; setenv distro_bootpart 6;" \
• " fi; " \
• " elif test "x${BOOT_SLOT}" = "xB"; then " \
• " if test ${BOOT_B_LEFT} -gt 0; then " \
• " setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1; " \
• " echo "Found valid RAUC slot B"; " \
• " setenv raucslot "rauc.slot=B"; " \
• " setenv raucpart B; setenv distro_bootpart 7;" \
• " fi; " \
• " fi; " \
• "done; " \
• "if test -n "${raucslot}"; then " \
• " setenv bootargs console=ttyMSM1 root=PARTLABEL=rootfs_${raucpart} rw rootwait ${raucslot}; " \
• " saveenv; " \
• "else " \
• " echo "No valid RAUC slot found. Resetting tries to 3"; " \
• " setenv BOOT_A_LEFT 3; " \
• " setenv BOOT_B_LEFT 3; " \
• " saveenv; " \
• " reset; " \
• "fi; " \
• "load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} /boot/fitImage && bootm"

#endif