Hi Sean
On 5/5/20 1:02 PM, Sean Anderson wrote:
On 5/5/20 5:01 AM, Rick Chen wrote:
Hi Sean
This patch adds documentation for the Sipeed Maix bit, and more generally for the Kendryte K210 processor.
Signed-off-by: Sean Anderson seanga2@gmail.com
Changes in v9:
- Mark dts code block as "none" explicitly
Changes in v7:
- Split off into its own patch
- Fix size of clint
doc/board/index.rst | 1 + doc/board/sipeed/index.rst | 9 ++ doc/board/sipeed/maix.rst | 298 +++++++++++++++++++++++++++++++++++++ 3 files changed, 308 insertions(+) create mode 100644 doc/board/sipeed/index.rst create mode 100644 doc/board/sipeed/maix.rst
The CI verification of v10 still fail, please check: https://travis-ci.org/github/rickchen36/u-boot-riscv/builds/683207657
Thanks, Rick
Hm, that's strange. I didn't see any of these errors when I ran CI. Perhaps it is an interaction with one of the other patches merged. Is it possible to get the u-boot.map file? The EPC address is present, but without the map we can't tell what function caused the error.
--Sean
Ok, so I did some testing, and I was unable to recreate the successful test case on my system. For example, I tried to build commit 8d5d3bc, which built successfully on travis [1], locally. I got the same output as the failing build on travis locally (which is attached as build.log). Perhaps it is related to the warning
qemu-system-riscv64: warning: No -bios option specified. Not loading a firmware.
which is present in the failed tests? I would like to bisect this to locate the problem, but that won't be possible until I can get a clean build to start from.
[1] https://travis-ci.org/github/Forty-Bot/u-boot/jobs/682461390
I just remove your v10 patchs and run again today, it will pass (Build #53) https://travis-ci.org/github/rickchen36/u-boot-riscv/builds/683645440
Please check about 52 and 53.
Thanks, Rick
--Sean