It should be possible to read an output GPIO. For now it is not clear how to do this. Perhaps the driver should be adjusted to use memory-mapped access throughout. For now, return an error to avoid confusion.
Not to apply.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/gpio/intel_ich6_gpio.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c index 67bf0a2..5cc86d7 100644 --- a/drivers/gpio/intel_ich6_gpio.c +++ b/drivers/gpio/intel_ich6_gpio.c @@ -195,6 +195,14 @@ static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir) return 0; }
+static int _ich6_gpio_get_direction(uint16_t base, unsigned offset) +{ + u32 val; + + val = inl(base); + return !(val & (1UL << offset)); +} + static int _gpio_ich6_pinctrl_cfg_pin(s32 gpiobase, s32 iobase, int pin_node) { u32 gpio_offset[2]; @@ -432,6 +440,13 @@ static int ich6_gpio_get_value(struct udevice *dev, unsigned offset) u32 tmplong; int r;
+ /* + * TODO: Mirror this register since reading only works when it is an + * input, Alternatively figure out how to make the hardware work with + * this. + */ + if (_ich6_gpio_get_direction(bank->io_sel, offset)) + return -EIO; tmplong = inl(bank->lvl); r = (tmplong & (1UL << offset)) ? 1 : 0; return r;