Signed-off-by: Wolfgang Denk wd@denx.de --- arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 -- board/LEOX/elpt860/README.LEOX | 1 - board/palmtreo680/README | 17 ----------------- board/sandpoint/README | 2 -- board/siemens/rut/board.c | 4 ---- doc/README.gpt | 7 ------- doc/README.p1010rdb | 1 - doc/README.qemu-mips | 1 - doc/driver-model/UDM-block.txt | 1 - drivers/usb/gadget/f_mass_storage.c | 5 ----- include/configs/T4240EMU.h | 4 ---- tools/buildman/README | 1 - 12 files changed, 46 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 5a3d52c..56c497f 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -526,8 +526,6 @@ struct prcm_regs const omap5_es2_prcm = { .cm1_abe_timer8_clkctrl = 0x4a004580, .cm1_abe_wdt3_clkctrl = 0x4a004588,
- - /* cm2.ckgen */ .cm_clksel_mpu_m3_iss_root = 0x4a008100, .cm_clksel_usb_60mhz = 0x4a008104, diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX index fe3c0f1..aa41ff8 100644 --- a/board/LEOX/elpt860/README.LEOX +++ b/board/LEOX/elpt860/README.LEOX @@ -46,7 +46,6 @@ U-Boot, at the address of 0x03000000.
=============================================================================
- ################################################## # Operation on the serial console (SMC1) ############################## diff --git a/board/palmtreo680/README b/board/palmtreo680/README index 46828eb..c8799c6 100644 --- a/board/palmtreo680/README +++ b/board/palmtreo680/README @@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly. For that matter, I'd love to hear from you if you succeed.
- Details on the SPL ==================
@@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the remainder of u-boot and jumps to it.
- The docg4's "reliable mode" ===========================
@@ -79,7 +77,6 @@ module parameter), but not reading. However, the u-boot docg4_spl driver does read in reliable mode, in the same fashion as the IPL.
- Details on the IPL and its data format ======================================
@@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation of the IPL, and expects the image to be stored in the same format.
- Instructions on Programming u-boot to flash ===========================================
@@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the flash using Linux running on the Treo.
- Hardware Prerequisites ======================
@@ -136,7 +131,6 @@ A Linux desktop PC. to flash, you'll really want to use a Linux PC.
- Treo-side Software Prerequisites ================================
@@ -152,7 +146,6 @@ Linux bootloader for PalmOS: parameters passed to the kernel.
- Linux kernel:
The kernel on the Treo 680 is still a little rough around the edges, and the @@ -200,7 +193,6 @@ Linux kernel: and /dev/mtd2 for these partitions, respectively. Ensure that your root file system at least has /dev/mtd1 if you are not running udev or mdev.
- Userspace Utilities:
In addition to everything necessary to provide a useful userspace environment @@ -221,19 +213,16 @@ Userspace Utilities: from the mtd-utils package.
- Desktop PC-side Software Prerequisites ======================================
Terminal emulator application: minicom, kermit, etc.
- Linux kernel: Compiled with CONFIG_USB_SERIAL enabled. Build this as a module.
- Recommended (Not directly related to u-boot) ============================================
@@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when mounting to avoid the need to run a portmapper like rpcbind.
- Preliminaries =============
@@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card. If all of the above went well, you can now program u-boot.
- Programming u-boot ==================
@@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000. Shutdown linux, remove and re-insert the battery, hold your breath...
- Enjoying u-boot ===============
@@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver. This should be corrected soon.
- Customizing ===========
@@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block. But adding this should be straightforward.
- Restoring PalmOS ================
@@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1 dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1 modprobe -r docg4
- TODO ====
diff --git a/board/sandpoint/README b/board/sandpoint/README index a2e0831..c9996a8 100644 --- a/board/sandpoint/README +++ b/board/sandpoint/README @@ -15,8 +15,6 @@ tkoeller@gmx.net. Thomas Koeller
- - The port was tested on a Sandpoint 8240 X3 board, with U-Boot installed in the flash memory of the CPU card. Please use the following DIP switch settings: diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index f2b0476..5de8fc6 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -328,8 +328,6 @@ static int get_clk(struct dpll_regs *dpll_regs) return f; };
- - int clk_get(int clk) { return get_clk(&dpll_lcd_regs); @@ -426,7 +424,5 @@ static int board_video_init(void)
return 0; } - - #endif /* ifdef CONFIG_VIDEO */ #include "../common/board.c" diff --git a/doc/README.gpt b/doc/README.gpt index 81dfe58..5c133f3 100644 --- a/doc/README.gpt +++ b/doc/README.gpt @@ -6,7 +6,6 @@ # # SPDX-License-Identifier: GPL-2.0+
- Glossary: ======== - UUID -(Universally Unique Identifier) @@ -22,7 +21,6 @@ Introduction: This document describes the GPT partition table format and usage of the gpt command in u-boot.
- UUID introduction: ====================
@@ -78,7 +76,6 @@ GPT brief explanation: LBA -1 |Secondary GPT Header | ----------------------------------------------------------
- For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called "protective MBR". Its first partition entry ID has 0xEE value, and disk software, which is not @@ -114,7 +111,6 @@ Offset Size Description TOTAL: 512 B
- IMPORTANT:
GPT headers and partition entries are protected by CRC32 (the POSIX CRC32). @@ -132,7 +128,6 @@ sizeof(partition_entry_size (usually 128))) Observe, how Secondary GPT is placed in the memory. It is NOT a mirror reflect of the Primary.
- Partition Entry Format: ---------------------- Offset Size Description @@ -150,7 +145,6 @@ of the Primary. Bit 62 - Hidden Bit 63 - Not mount
- Creating GPT partitions in U-Boot: ==============
@@ -171,7 +165,6 @@ To restore GUID partition table one needs to: 2. From u-boot prompt type: gpt write mmc 0 $partitions
- Useful info: ============
diff --git a/doc/README.p1010rdb b/doc/README.p1010rdb index dee63d7..6b2b5ff 100644 --- a/doc/README.p1010rdb +++ b/doc/README.p1010rdb @@ -185,7 +185,6 @@ Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz): => reset
- Boot Linux from network using TFTP on P1010RDB ============================================== Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area. diff --git a/doc/README.qemu-mips b/doc/README.qemu-mips index 1fdfbab..a192752 100644 --- a/doc/README.qemu-mips +++ b/doc/README.qemu-mips @@ -15,7 +15,6 @@ recent qemu versions. When using emulated flash, launch with -pflash <filename> and erase mips_bios.bin.
- Notes for the Qemu MIPS port ----------------------------
diff --git a/doc/driver-model/UDM-block.txt b/doc/driver-model/UDM-block.txt index b42ec69..ffbbdf3 100644 --- a/doc/driver-model/UDM-block.txt +++ b/doc/driver-model/UDM-block.txt @@ -218,7 +218,6 @@ II) Approach in near future.
- III) Analysis of in-tree drivers --------------------------------
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index b34068a..6ecdea3 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -9,7 +9,6 @@ * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause */
- /* * The Mass Storage Function acts as a USB Mass Storage device, * appearing to the host as a disk drive or as a CD-ROM drive. In @@ -153,7 +152,6 @@ * http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf. */
- /* * Driver Design * @@ -264,7 +262,6 @@
static const char fsg_string_interface[] = "Mass Storage";
- #define FSG_NO_INTR_EP 1 #define FSG_NO_DEVICE_STRINGS 1 #define FSG_NO_OTG 1 @@ -2629,8 +2626,6 @@ usb_copy_descriptors(struct usb_descriptor_header **src) return ret; }
- - static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h index 9fa6b77..5e228f3 100644 --- a/include/configs/T4240EMU.h +++ b/include/configs/T4240EMU.h @@ -30,7 +30,6 @@ #define CONFIG_DDR_CLK_FREQ 133333333 #define CONFIG_FSL_TBCLK_EXTRA_DIV 100
- /* * DDR Setup */ @@ -76,7 +75,6 @@ #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
- /* I2C */ #define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */ #define CONFIG_SYS_FSL_I2C2_SPEED 4000000 @@ -104,8 +102,6 @@ #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
- - #define CONFIG_BOOTDELAY 0
/* diff --git a/tools/buildman/README b/tools/buildman/README index b6b771c..6cecdb6 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -677,7 +677,6 @@ the build speed by building all commits for a board instead of the other way around.
- Simon Glass sjg@chromium.org Halloween 2012