From: David Brownell dbrownell@users.sourceforge.net
Add some basic declarations for DaVinci DM355/DM350/DM335 support, keyed on CONFIG_SOC_DM355. (DM35X isn't quite right because the DM357 is very different; while the DM355 is like a DM355 without the MPEG/JPEG coprocessor).
These have different peripherals than the DM6446, and some of the peripherals are at different addresses. Notably for U-Boot, there's no EMAC, and the NAND controller address is different
Signed-off-by: David Brownell dbrownell@users.sourceforge.net --- cpu/arm926ejs/davinci/Makefile | 1 cpu/arm926ejs/davinci/dm355.c | 45 ++++++++++++++++++++++++ include/asm-arm/arch-davinci/hardware.h | 55 ++++++++++++++++++++---------- 3 files changed, 84 insertions(+), 17 deletions(-)
--- a/cpu/arm926ejs/davinci/Makefile +++ b/cpu/arm926ejs/davinci/Makefile @@ -28,6 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a
COBJS-y += timer.o psc.o +COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM644X) += dm644x.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += ether.o lxt972.o dp83848.o
--- /dev/null +++ b/cpu/arm926ejs/davinci/dm355.c @@ -0,0 +1,45 @@ +/* + * SoC-specific code for tms320dm355 and similar chips + * + * Copyright (C) 2009 David Brownell + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/arch/hardware.h> + + +void davinci_enable_uart0(void) +{ + lpsc_on(DAVINCI_LPSC_UART0); + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x00006001; +} + + +#ifdef CONFIG_DRIVER_DAVINCI_I2C +void davinci_enable_i2c(void) +{ + lpsc_on(DAVINCI_LPSC_I2C); + + /* Enable I2C pin Mux */ + REG(PINMUX3) |= (1 << 20) | (1 << 19); +} +#endif --- a/include/asm-arm/arch-davinci/hardware.h +++ b/include/asm-arm/arch-davinci/hardware.h @@ -44,13 +44,16 @@ typedef volatile unsigned int * dv_reg_p
/* * Base register addresses + * + * NOTE: some of these DM6446-specific addresses DO NOT WORK + * on other DaVinci chips. Double check them before you try + * using the addresses ... or PSC module identifiers, etc. */ #define DAVINCI_DMA_3PCC_BASE (0x01c00000) #define DAVINCI_DMA_3PTC0_BASE (0x01c10000) #define DAVINCI_DMA_3PTC1_BASE (0x01c10400) #define DAVINCI_UART0_BASE (0x01c20000) #define DAVINCI_UART1_BASE (0x01c20400) -#define DAVINCI_UART2_BASE (0x01c20800) #define DAVINCI_I2C_BASE (0x01c21000) #define DAVINCI_TIMER0_BASE (0x01c21400) #define DAVINCI_TIMER1_BASE (0x01c21800) @@ -62,30 +65,41 @@ typedef volatile unsigned int * dv_reg_p #define DAVINCI_PLL_CNTRL0_BASE (0x01c40800) #define DAVINCI_PLL_CNTRL1_BASE (0x01c40c00) #define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01c41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01c42000) #define DAVINCI_ARM_INTC_BASE (0x01c48000) -#define DAVINCI_IEEE1394_BASE (0x01c60000) #define DAVINCI_USB_OTG_BASE (0x01c64000) #define DAVINCI_CFC_ATA_BASE (0x01c66000) #define DAVINCI_SPI_BASE (0x01c66800) #define DAVINCI_GPIO_BASE (0x01c67000) -#define DAVINCI_UHPI_BASE (0x01c67800) #define DAVINCI_VPSS_REGS_BASE (0x01c70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01c80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01c81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01c82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01c84000) -#define DAVINCI_IMCOP_BASE (0x01cc0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01e00000) -#define DAVINCI_VLYNQ_BASE (0x01e01000) -#define DAVINCI_MCBSP_BASE (0x01e02000) -#define DAVINCI_MMC_SD_BASE (0x01e10000) -#define DAVINCI_MS_BASE (0x01e20000) #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) #define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) #define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) #define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0c000000) + +#ifdef CONFIG_SOC_DM644X +#define DAVINCI_UART2_BASE 0x01c20800 +#define DAVINCI_UHPI_BASE 0x01c67800 +#define DAVINCI_EMAC_CNTRL_REGS_BASE 0x01c80000 +#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE 0x01c81000 +#define DAVINCI_EMAC_WRAPPER_RAM_BASE 0x01c82000 +#define DAVINCI_MDIO_CNTRL_REGS_BASE 0x01c84000 +#define DAVINCI_IMCOP_BASE 0x01cc0000 +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01e00000 +#define DAVINCI_VLYNQ_BASE 0x01e01000 +#define DAVINCI_ASP_BASE 0x01e02000 +#define DAVINCI_MMC_SD_BASE 0x01e10000 +#define DAVINCI_MS_BASE 0x01e20000 +#define DAVINCI_VLYNQ_REMOTE_BASE 0x0c000000 + +#elif defined(CONFIG_SOC_DM355) +#define DAVINCI_MMC_SD1_BASE 0x01e00000 +#define DAVINCI_ASP0_BASE 0x01e02000 +#define DAVINCI_ASP1_BASE 0x01e04000 +#define DAVINCI_UART2_BASE 0x01e06000 +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01e10000 +#define DAVINCI_MMC_SD0_BASE 0x01e11000 + +#endif
/* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 @@ -168,7 +182,14 @@ void davinci_errata_workarounds(void);
/* Miscellania... */ #define VBPR (0x20000020) -#define PINMUX0 (0x01c40000) -#define PINMUX1 (0x01c40004) + +/* NOTE: system control modules are *highly* chip-specific, both + * as to register content (e.g. for muxing) and which registers exist. + */ +#define PINMUX0 0x01c40000 +#define PINMUX1 0x01c40004 +#define PINMUX2 0x01c40008 +#define PINMUX3 0x01c4000c +#define PINMUX4 0x01c40010
#endif /* __ASM_ARCH_HARDWARE_H */