This is not used since this commit:
ed7fe2bee12 ppc: Remove xpedite boards
Drop the driver and Kconfig option.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
board/xes/common/Makefile | 1 - board/xes/common/actl_nand.c | 49 ------------------------------------ 2 files changed, 50 deletions(-) delete mode 100644 board/xes/common/actl_nand.c
diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index d6f09f71b75..b139ee9f759 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -7,4 +7,3 @@ obj-$(CONFIG_MPC86XX) += fsl_8xxx_clk.o obj-$(CONFIG_ARCH_P2020) += fsl_8xxx_clk.o obj-$(CONFIG_MPC85XX) += fsl_8xxx_misc.o board.o obj-$(CONFIG_MPC86XX) += fsl_8xxx_misc.o board.o -obj-$(CONFIG_NAND_ACTL) += actl_nand.o diff --git a/board/xes/common/actl_nand.c b/board/xes/common/actl_nand.c deleted file mode 100644 index 2d8a57576a6..00000000000 --- a/board/xes/common/actl_nand.c +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * - * This driver support NAND devices which have address lines - * connected as ALE and CLE inputs. - */ - -#include <common.h> -#include <nand.h> -#include <linux/mtd/rawnand.h> -#include <asm/io.h> - -/* - * Hardware specific access to control-lines - */ -static void nand_addr_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl) -{ - struct nand_chip *this = mtd_to_nand(mtd); - ulong IO_ADDR_W; - - if (ctrl & NAND_CTRL_CHANGE) { - IO_ADDR_W = (ulong)this->IO_ADDR_W; - - IO_ADDR_W &= ~(CONFIG_SYS_NAND_ACTL_CLE | - CONFIG_SYS_NAND_ACTL_ALE | - CONFIG_SYS_NAND_ACTL_NCE); - if (ctrl & NAND_CLE) - IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_ALE; - if (ctrl & NAND_NCE) - IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_NCE; - - this->IO_ADDR_W = (void *)IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; - nand->cmd_ctrl = nand_addr_hwcontrol; - nand->chip_delay = CONFIG_SYS_NAND_ACTL_DELAY; - - return 0; -}