From: Jagannadha Sutradharudu Teki jagannadh.teki@gmail.com
Now saving output files in a separate directory through KBUILD_OUTPUT not with BUILD_DIR, so updated the documentation accordingly.
Signed-off-by: Jagannadha Sutradharudu Teki jagannadh.teki@gmail.com --- Changes for v2: - none
MAKEALL | 12 ++++++------ README | 10 +++++----- doc/README.kwbimage | 4 ++-- 3 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/MAKEALL b/MAKEALL index 392ea8d..187770b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -42,7 +42,7 @@ usage() architecture "ARCH". Substitute "ARCH" for any supported architecture (default: "") MAKEALL_LOGDIR output all logs to here (default: ./LOG/) - BUILD_DIR output build directory (default: ./) + KBUILD_OUTPUT output build directory (default: ./) BUILD_NBUILDS number of parallel targets (default: 1)
Examples: @@ -223,14 +223,14 @@ BUILD_MANY=0
if [ "${BUILD_NBUILDS}" -gt 1 ] ; then BUILD_MANY=1 - : ${BUILD_DIR:=./build} - mkdir -p "${BUILD_DIR}/ERR" - find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} + + : ${KBUILD_OUTPUT:=./build} + mkdir -p "${KBUILD_OUTPUT}/ERR" + find "${KBUILD_OUTPUT}/ERR/" -type f -exec rm -f {} + fi
-: ${BUILD_DIR:=.} +: ${KBUILD_OUTPUT:=.}
-OUTPUT_PREFIX="${BUILD_DIR}" +OUTPUT_PREFIX="${KBUILD_OUTPUT}"
[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then diff --git a/README b/README index e88184b..8e05f69 100644 --- a/README +++ b/README @@ -4969,14 +4969,14 @@ this behavior and build U-Boot to some external directory: make O=/tmp/build NAME_defconfig make O=/tmp/build all
-2. Set environment variable BUILD_DIR to point to the desired location: +2. Set environment variable KBUILD_OUTPUT to point to the desired location:
- export BUILD_DIR=/tmp/build + export KBUILD_OUTPUT=/tmp/build make distclean make NAME_defconfig make all
-Note that the command line "O=" setting overrides the BUILD_DIR environment +Note that the command line "O=" setting overrides the KBUILD_OUTPUT environment variable.
@@ -5032,13 +5032,13 @@ or to build on a native PowerPC system you can type
When using the MAKEALL script, the default behaviour is to build U-Boot in the source directory. This location can be changed by -setting the BUILD_DIR environment variable. Also, for each target +setting the KBUILD_OUTPUT environment variable. Also, for each target built, the MAKEALL script saves two log files (<target>.ERR and <target>.MAKEALL) in the <source dir>/LOG directory. This default location can be changed by setting the MAKEALL_LOGDIR environment variable. For example:
- export BUILD_DIR=/tmp/build + export KBUILD_OUTPUT=/tmp/build export MAKEALL_LOGDIR=/tmp/log CROSS_COMPILE=ppc_8xx- MAKEALL
diff --git a/doc/README.kwbimage b/doc/README.kwbimage index 13f6f92..8c02298 100644 --- a/doc/README.kwbimage +++ b/doc/README.kwbimage @@ -30,10 +30,10 @@ kwbimage support available with mkimage utility will generate kirkwood boot image that can be flashed on the board NAND/SPI flash. The make target which uses mkimage to produce such an image is "u-boot.kwb". For example:
- export BUILD_DIR=/tmp/build + export KBUILD_OUTPUT=/tmp/build make distclean make yourboard_config - make $BUILD_DIR/u-boot.kwb + make $KBUILD_OUTPUT/u-boot.kwb
Board specific configuration file specifications: