In preparation for FlexSPI booting, clean-up the common nodes showing the FlexSPI and flash nodes to SPL so they can be enumerated in SPL.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi index 73ddfdade6..d576b522b8 100644 --- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi @@ -6,6 +6,10 @@ #include "imx8mm-u-boot.dtsi"
/ { + aliases { + spi0 = &flexspi; + }; + wdt-reboot { compatible = "wdt-reboot"; wdt = <&wdog1>; @@ -21,6 +25,14 @@ phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; };
+&flexspi { + u-boot,dm-spl; + flash@0 { + u-boot,dm-spl; + spi-tx-bus-width = <1>; + }; +}; + &gpio1 { u-boot,dm-spl; };