Certain peripherals used by K2G GP aren't used on K2G ICE evm. Or configuration is slightly different. Therefore, use board detection to deal with these variations.
Signed-off-by: Franklin S Cooper Jr fcooper@ti.com Reviewed-by: Tom Rini trini@konsulko.com --- board/ti/ks2_evm/board_k2g.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c index a93ef47..96b313f 100644 --- a/board/ti/ks2_evm/board_k2g.c +++ b/board/ti/ks2_evm/board_k2g.c @@ -208,7 +208,9 @@ int board_mmc_init(bd_t *bis) return -1; }
- omap_mmc_init(0, 0, 0, -1, -1); + if (board_is_k2g_gp()) + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } @@ -278,11 +280,13 @@ int embedded_dtb_select(void)
k2g_reset_mux_config();
- /* deassert FLASH_HOLD */ - clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET, - BIT(9)); - setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET, - BIT(9)); + if (board_is_k2g_gp()) { + /* deassert FLASH_HOLD */ + clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET, + BIT(9)); + setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET, + BIT(9)); + }
return 0; }