This configures the Juno board to enable ethernet using the SMSC9118 ethernet controller found in the board. Tested by TFTP-booting a kernel over ethernet.
Signed-off-by: Linus Walleij linus.walleij@linaro.org --- board/armltd/vexpress64/vexpress64.c | 3 +++ include/configs/vexpress_aemv8a.h | 12 ++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 7ab000cca77b..de6286435d97 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -137,5 +137,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_SMC91111 rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); #endif +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif return rc; } diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index e276fff7e442..5ffc84dc5ecd 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -138,9 +138,17 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
-/* SMSC91C111 Ethernet Configuration */ +/* Ethernet Configuration */ +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +/* The real hardware Versatile express uses SMSC9118 */ +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_32_BIT 1 +#define CONFIG_SMC911X_BASE (0x018000000) +#else +/* The Vexpress64 simulators use SMSC91C111 */ #define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE (0x01A000000) +#endif
/* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL @@ -229,7 +237,7 @@ "fdt_addr_r=0x83000000\0" \ "fdt_high=0xa0000000\0"
-#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0" +#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/ram0" #define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \ "$initrd_addr_r:$initrd_size $fdt_addr_r" #define CONFIG_BOOTDELAY -1