-----Original Message----- From: Fabio Estevam [mailto:festevam@gmail.com] Sent: Saturday, December 02, 2017 4:53 AM To: Peng Fan peng.fan@nxp.com Cc: Peter Robinson pbrobinson@gmail.com; Fabio Estevam fabio.estevam@nxp.com; u-boot@lists.denx.de; Diego Dorta diego.dorta@nxp.com Subject: Re: [U-Boot] [PATCH 00/23] imx: add i.MX8M support and i.MX8MQ EVK
Hi Peng,
On Thu, Nov 30, 2017 at 12:53 AM, Peng Fan peng.fan@nxp.com wrote:
I don't see a README in here, I'm wondering what the details/requirements are around ARM Trusted Firmware and the build process, for this platform does it use the open ARM ATF, or is it similar to other platforms that early boot is proprietary and u-boot is just chain loaded? Something like the sunxi 64 bit readme [1] would be
useful.
We are using ATF and use a dedicated package tool to generate the final
image.
Then the boot flow is SPL->ATF/TEE->U-Boot->Kernel. I do not have much time to write that down now. You may get a very good user guide from NXP sw release, if you want to boot your board or else.
I agree with Peter that a README file is really important for this series.
Without it we can't really test it on the real hardware.
My colleague Diego tried to test it and was not able to boot it, so please add a README file on your v2.
Ok. I'll add a README file, but arm trusted firmware code and imx-mkimage code are not public available now.
Another thing is the ddr script is not using structure based style code. It is hard for me to convert it from register offset to structure based. So In V2, I prefer to leave that piece code as TODO. I'll still include the ddr part in the V2 patchset, but I am not sure it will be accepted or not.
Regards, Peng.
Thanks