Re: [U-Boot] [PATCH v2 7/7] arm: ls102xa: Add SD boot support for LS1021ATWR board

On 09/26/2014 03:33 AM, Alison Wang wrote:

This patch adds SD boot support for LS1021ATWR board. SPL framework is used. PBL initialize the internal RAM and copy SPL to it, then SPL initialize DDR using SPD and copy u-boot from SD card to DDR, finally SPL transfer control to u-boot.

Signed-off-by: Chen Lu chen.lu@freescale.com Signed-off-by: Alison Wang alison.wang@freescale.com Signed-off-by: Jason Jin jason.jin@freescale.com

---

Change log: v2: Use generic u-boot-spl.lds.

Please update status and maintainers for this board.

York