Since u-boot has added the spi-mem framework and replaced the spi-nor framework, the mtk_qspi is no longer compatible with the new spi-nor driver.
Remove this driver, and a new driver will be added later.
Cc: Jagan Teki jagan@openedev.com Signed-off-by: Weijie Gao weijie.gao@mediatek.com --- Changes since v1: none --- drivers/spi/Kconfig | 8 - drivers/spi/Makefile | 1 - drivers/spi/mtk_qspi.c | 359 ----------------------------------------- 3 files changed, 368 deletions(-) delete mode 100644 drivers/spi/mtk_qspi.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 9469147152a..95a63065251 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -150,14 +150,6 @@ config MT7621_SPI the SPI NOR flash on platforms embedding this Ralink / MediaTek SPI core, like MT7621/7628/7688.
-config MTK_QSPI - bool "Mediatek QSPI driver" - imply SPI_FLASH_BAR - help - Enable the Mediatek QSPI driver. This driver can be - used to access the SPI NOR flash on platforms embedding this - Mediatek QSPI IP core. - config MVEBU_A3700_SPI bool "Marvell Armada 3700 SPI driver" select CLK_ARMADA_3720 diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3f9f2fab2b9..bbec33aa06e 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -36,7 +36,6 @@ obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o -obj-$(CONFIG_MTK_QSPI) += mtk_qspi.o obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o diff --git a/drivers/spi/mtk_qspi.c b/drivers/spi/mtk_qspi.c deleted file mode 100644 index b510733e92c..00000000000 --- a/drivers/spi/mtk_qspi.c +++ /dev/null @@ -1,359 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2018 MediaTek, Inc. - * Author : Guochun.Mao@mediatek.com - */ - -#include <common.h> -#include <dm.h> -#include <malloc.h> -#include <spi.h> -#include <asm/io.h> -#include <linux/iopoll.h> -#include <linux/ioport.h> - -/* Register Offset */ -struct mtk_qspi_regs { - u32 cmd; - u32 cnt; - u32 rdsr; - u32 rdata; - u32 radr[3]; - u32 wdata; - u32 prgdata[6]; - u32 shreg[10]; - u32 cfg[2]; - u32 shreg10; - u32 mode_mon; - u32 status[4]; - u32 flash_time; - u32 flash_cfg; - u32 reserved_0[3]; - u32 sf_time; - u32 pp_dw_data; - u32 reserved_1; - u32 delsel_0[2]; - u32 intrstus; - u32 intren; - u32 reserved_2; - u32 cfg3; - u32 reserved_3; - u32 chksum; - u32 aaicmd; - u32 wrprot; - u32 radr3; - u32 dual; - u32 delsel_1[3]; -}; - -struct mtk_qspi_platdata { - fdt_addr_t reg_base; - fdt_addr_t mem_base; -}; - -struct mtk_qspi_priv { - struct mtk_qspi_regs *regs; - unsigned long *mem_base; - u8 op; - u8 tx[3]; /* only record max 3 bytes paras, when it's address. */ - u32 txlen; /* dout buffer length - op code length */ - u8 *rx; - u32 rxlen; -}; - -#define MTK_QSPI_CMD_POLLINGREG_US 500000 -#define MTK_QSPI_WRBUF_SIZE 256 -#define MTK_QSPI_COMMAND_ENABLE 0x30 - -/* NOR flash controller commands */ -#define MTK_QSPI_RD_TRIGGER BIT(0) -#define MTK_QSPI_READSTATUS BIT(1) -#define MTK_QSPI_PRG_CMD BIT(2) -#define MTK_QSPI_WR_TRIGGER BIT(4) -#define MTK_QSPI_WRITESTATUS BIT(5) -#define MTK_QSPI_AUTOINC BIT(7) - -#define MTK_QSPI_MAX_RX_TX_SHIFT 0x6 -#define MTK_QSPI_MAX_SHIFT 0x8 - -#define MTK_QSPI_WR_BUF_ENABLE 0x1 -#define MTK_QSPI_WR_BUF_DISABLE 0x0 - -static int mtk_qspi_execute_cmd(struct mtk_qspi_priv *priv, u8 cmd) -{ - u8 tmp; - u8 val = cmd & ~MTK_QSPI_AUTOINC; - - writeb(cmd, &priv->regs->cmd); - - return readb_poll_timeout(&priv->regs->cmd, tmp, !(val & tmp), - MTK_QSPI_CMD_POLLINGREG_US); -} - -static int mtk_qspi_tx_rx(struct mtk_qspi_priv *priv) -{ - int len = 1 + priv->txlen + priv->rxlen; - int i, ret, idx; - - if (len > MTK_QSPI_MAX_SHIFT) - return -ERR_INVAL; - - writeb(len * 8, &priv->regs->cnt); - - /* start at PRGDATA5, go down to PRGDATA0 */ - idx = MTK_QSPI_MAX_RX_TX_SHIFT - 1; - - /* opcode */ - writeb(priv->op, &priv->regs->prgdata[idx]); - idx--; - - /* program TX data */ - for (i = 0; i < priv->txlen; i++, idx--) - writeb(priv->tx[i], &priv->regs->prgdata[idx]); - - /* clear out rest of TX registers */ - while (idx >= 0) { - writeb(0, &priv->regs->prgdata[idx]); - idx--; - } - - ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_PRG_CMD); - if (ret) - return ret; - - /* restart at first RX byte */ - idx = priv->rxlen - 1; - - /* read out RX data */ - for (i = 0; i < priv->rxlen; i++, idx--) - priv->rx[i] = readb(&priv->regs->shreg[idx]); - - return 0; -} - -static int mtk_qspi_read(struct mtk_qspi_priv *priv, - u32 addr, u8 *buf, u32 len) -{ - memcpy(buf, (u8 *)priv->mem_base + addr, len); - return 0; -} - -static void mtk_qspi_set_addr(struct mtk_qspi_priv *priv, u32 addr) -{ - int i; - - for (i = 0; i < 3; i++) { - writeb(addr & 0xff, &priv->regs->radr[i]); - addr >>= 8; - } -} - -static int mtk_qspi_write_single_byte(struct mtk_qspi_priv *priv, - u32 addr, u32 length, const u8 *data) -{ - int i, ret; - - mtk_qspi_set_addr(priv, addr); - - for (i = 0; i < length; i++) { - writeb(*data++, &priv->regs->wdata); - ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER); - if (ret < 0) - return ret; - } - return 0; -} - -static int mtk_qspi_write_buffer(struct mtk_qspi_priv *priv, u32 addr, - const u8 *buf) -{ - int i, data; - - mtk_qspi_set_addr(priv, addr); - - for (i = 0; i < MTK_QSPI_WRBUF_SIZE; i += 4) { - data = buf[i + 3] << 24 | buf[i + 2] << 16 | - buf[i + 1] << 8 | buf[i]; - writel(data, &priv->regs->pp_dw_data); - } - - return mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER); -} - -static int mtk_qspi_write(struct mtk_qspi_priv *priv, - u32 addr, const u8 *buf, u32 len) -{ - int ret; - - /* setting pre-fetch buffer for page program */ - writel(MTK_QSPI_WR_BUF_ENABLE, &priv->regs->cfg[1]); - while (len >= MTK_QSPI_WRBUF_SIZE) { - ret = mtk_qspi_write_buffer(priv, addr, buf); - if (ret < 0) - return ret; - - len -= MTK_QSPI_WRBUF_SIZE; - addr += MTK_QSPI_WRBUF_SIZE; - buf += MTK_QSPI_WRBUF_SIZE; - } - /* disable pre-fetch buffer for page program */ - writel(MTK_QSPI_WR_BUF_DISABLE, &priv->regs->cfg[1]); - - if (len) - return mtk_qspi_write_single_byte(priv, addr, len, buf); - - return 0; -} - -static int mtk_qspi_claim_bus(struct udevice *dev) -{ - /* nothing to do */ - return 0; -} - -static int mtk_qspi_release_bus(struct udevice *dev) -{ - /* nothing to do */ - return 0; -} - -static int mtk_qspi_transfer(struct mtk_qspi_priv *priv, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - u32 bytes = DIV_ROUND_UP(bitlen, 8); - u32 addr; - - if (!bytes) - return -ERR_INVAL; - - if (dout) { - if (flags & SPI_XFER_BEGIN) { - /* parse op code and potential paras first */ - priv->op = *(u8 *)dout; - if (bytes > 1) - memcpy(priv->tx, (u8 *)dout + 1, - bytes <= 4 ? bytes - 1 : 3); - priv->txlen = bytes - 1; - } - - if (flags == SPI_XFER_ONCE) { - /* operations without receiving or sending data. - * for example: erase, write flash register or write - * enable... - */ - priv->rx = NULL; - priv->rxlen = 0; - return mtk_qspi_tx_rx(priv); - } - - if (flags & SPI_XFER_END) { - /* here, dout should be data to be written. - * and priv->tx should be filled 3Bytes address. - */ - addr = priv->tx[0] << 16 | priv->tx[1] << 8 | - priv->tx[2]; - return mtk_qspi_write(priv, addr, (u8 *)dout, bytes); - } - } - - if (din) { - if (priv->txlen >= 3) { - /* if run to here, priv->tx[] should be the address - * where read data from, - * and, din is the buf to receive data. - */ - addr = priv->tx[0] << 16 | priv->tx[1] << 8 | - priv->tx[2]; - return mtk_qspi_read(priv, addr, (u8 *)din, bytes); - } - - /* should be reading flash's register */ - priv->rx = (u8 *)din; - priv->rxlen = bytes; - return mtk_qspi_tx_rx(priv); - } - - return 0; -} - -static int mtk_qspi_xfer(struct udevice *dev, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) -{ - struct udevice *bus = dev->parent; - struct mtk_qspi_priv *priv = dev_get_priv(bus); - - return mtk_qspi_transfer(priv, bitlen, dout, din, flags); -} - -static int mtk_qspi_set_speed(struct udevice *bus, uint speed) -{ - /* nothing to do */ - return 0; -} - -static int mtk_qspi_set_mode(struct udevice *bus, uint mode) -{ - /* nothing to do */ - return 0; -} - -static int mtk_qspi_ofdata_to_platdata(struct udevice *bus) -{ - struct resource res_reg, res_mem; - struct mtk_qspi_platdata *plat = bus->platdata; - int ret; - - ret = dev_read_resource_byname(bus, "reg_base", &res_reg); - if (ret) { - debug("can't get reg_base resource(ret = %d)\n", ret); - return -ENOMEM; - } - - ret = dev_read_resource_byname(bus, "mem_base", &res_mem); - if (ret) { - debug("can't get map_base resource(ret = %d)\n", ret); - return -ENOMEM; - } - - plat->mem_base = res_mem.start; - plat->reg_base = res_reg.start; - - return 0; -} - -static int mtk_qspi_probe(struct udevice *bus) -{ - struct mtk_qspi_platdata *plat = dev_get_platdata(bus); - struct mtk_qspi_priv *priv = dev_get_priv(bus); - - priv->regs = (struct mtk_qspi_regs *)plat->reg_base; - priv->mem_base = (unsigned long *)plat->mem_base; - - writel(MTK_QSPI_COMMAND_ENABLE, &priv->regs->wrprot); - - return 0; -} - -static const struct dm_spi_ops mtk_qspi_ops = { - .claim_bus = mtk_qspi_claim_bus, - .release_bus = mtk_qspi_release_bus, - .xfer = mtk_qspi_xfer, - .set_speed = mtk_qspi_set_speed, - .set_mode = mtk_qspi_set_mode, -}; - -static const struct udevice_id mtk_qspi_ids[] = { - { .compatible = "mediatek,mt7629-qspi" }, - { } -}; - -U_BOOT_DRIVER(mtk_qspi) = { - .name = "mtk_qspi", - .id = UCLASS_SPI, - .of_match = mtk_qspi_ids, - .ops = &mtk_qspi_ops, - .ofdata_to_platdata = mtk_qspi_ofdata_to_platdata, - .platdata_auto_alloc_size = sizeof(struct mtk_qspi_platdata), - .priv_auto_alloc_size = sizeof(struct mtk_qspi_priv), - .probe = mtk_qspi_probe, -};